Comparative Study of Plywood Boards Produced with Castor Oil-Based Polyurethane and Phenol-Formaldehyde Using Pinus taeda L. Veneers Treated with Chromated Copper Arsenate

被引:0
|
作者
Sugahara, Estefani [1 ]
Casagrande, Bruno [1 ]
Arroyo, Felipe [2 ]
De Araujo, Victor [2 ]
Santos, Herisson [3 ]
Faustino, Emerson [3 ]
Christoforo, Andre [2 ]
Campos, Cristiane [1 ]
机构
[1] Sao Paulo State Univ, Sci & Engn Inst, BR-18409010 Itapeva, Brazil
[2] Univ Fed Sao Carlos, Exact Sci & Technol Ctr, BR-13565905 Sao Carlos, Brazil
[3] Fed Inst Educ Sci & Technol Rondonia, Campus Ariquemes, BR-76870000 Ariquemes, Brazil
来源
FORESTS | 2022年 / 13卷 / 07期
基金
巴西圣保罗研究基金会;
关键词
chromated-copper-arsenate; Pinus taeda; bio-composite; phenol-formaldehyde; castor oil-based polyuretane; physical and mechanical properties; ADHESIVES;
D O I
10.3390/f13071144
中图分类号
S7 [林业];
学科分类号
0829 ; 0907 ;
摘要
Plywood is widely used in civil construction. Due to the importance of preservation and gluing in bio-composites, this study compares the influence of a chemical treatment with CCA (chromated-copper-arsenate) on Pinus taeda L. wood veneers to produce two plywood types using phenol-formaldehyde (PF) and castor oil-based polyurethane (PU). Four different treatments were performed to analyze both varieties' physical and mechanical properties. As a result, an improvement in the properties of the treated panels was observed. Lower moisture contents and better interactions caused by less thickness swelling and water absorption were identified in the PU-based plywoods. The treatment with CCA was efficient, improving these properties when they were compared to the reference panels. Most treatments evidenced increases in the modulus of elasticity and modulus of rupture for both adhesives when the CCA treatment was applied to the veneers. Comparing the resins, the PF showed the best values of modulus of elasticity. All treatments met the requirements defined by the Brazilian standard document for the glue line shear.
引用
收藏
页数:16
相关论文
empty
未找到相关数据