Compensation of stray load loss induced detuning in rotor flux oriented induction machines

被引：4
|
作者：
Lamine, A. [1 ]
Levi, E. [1 ]
Cavagnino, A. [2 ]
机构：
[1] Liverpool John Moores Univ, Sch Engn, Liverpool L3 3AF, Merseyside, England
[2] Politecn Torino, Turin, Italy
来源：
PROCEEDINGS OF THE 41ST INTERNATIONAL UNIVERSITIES POWER ENGINEERING CONFERENCE, VOLS 1 AND 2 | 2006年
关键词：
induction machines; modified vector controller; detuning; stray load losses; vector control;
D O I：
10.1109/UPEC.2006.367566
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
Stray load loss (SLL) is a phenomenon that is neglected in standard d-q axis models of induction machines. Hence it appears as a source of detuned operation in rotor flux oriented machines, since vector controllers are not aware of its existence. Recent studies have shown that the detuning caused by the SLL is rather small. Nevertheless, provided that the necessary motor data are available, it is possible to provide a full compensation of SLL induced detuning in a simple manner. This paper at first illustrates quantitatively detuning effects due to stray load losses in vector controlled induction machines during transient mode of operation. It further develops a modified indirect rotor flux oriented (IRFO) controller that compensates detuning and verifies its operation by simulation. Iron losses are included at all times, so that the modified IRFO controller fully compensates both SLL and iron losses in steady state operation.
引用
收藏
页码：685 / +
页数：2
相关论文
共 50 条
  • [1] Iron loss in rotor-flux-oriented induction machines: Identification, assessment of detuning, and compensation
    Levi, E
    Sokola, M
    Boglietti, A
    Pastorelli, M
    [J]. IEEE TRANSACTIONS ON POWER ELECTRONICS, 1996, 11 (05) : 698 - 709
  • [2] Iron loss identification and detuning evaluation in rotor flux oriented induction machines
    Levi, E
    Sokola, M
    Boglietti, A
    Pastorelli, M
    [J]. PESC 96 RECORD - 27TH ANNUAL IEEE POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS I AND II, 1996, : 1555 - 1561
  • [3] Rotor-flux-oriented control of induction machines considering the stray load losses
    Levi, E
    Lamine, A
    Cavagnino, A
    [J]. 2005 IEEE 36th Power Electronic Specialists Conference (PESC), Vols 1-3, 2005, : 1325 - 1331
  • [4] Rotor flux oriented control of induction machines considering the core loss
    Levi, E
    [J]. ELECTRIC MACHINES AND POWER SYSTEMS, 1996, 24 (01): : 37 - 50
  • [5] STRAY LOSS IN SOLID-ROTOR INDUCTION MACHINES
    SPOONER, E
    [J]. IEE PROCEEDINGS-B ELECTRIC POWER APPLICATIONS, 1982, 129 (04): : 181 - 189
  • [6] Study on the impact of parameter variations and relevant compensation based of sensorless rotor flux oriented induction machines
    Zheng, P
    [J]. ICEMS'2001: PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS I AND II, 2001, : 1308 - 1312
  • [7] A method for magnetizing curve identification in rotor flux oriented induction machines
    Levi, E
    Sokola, M
    Vukosavic, SN
    [J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 2000, 15 (02) : 157 - 162
  • [8] ROTOR FLUX COMPUTATION IN SATURATED FIELD-ORIENTED INDUCTION MACHINES
    LEVI, E
    VUCKOVIC, V
    [J]. ELECTRIC MACHINES AND POWER SYSTEMS, 1993, 21 (06): : 741 - 754
  • [9] Detuning Induced by Stray Load and Iron Losses in Small Vector-Controlled Induction Motors
    Basic, Mateo
    Vukadinovic, Dinko
    Grgic, Ivan
    [J]. 2018 INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (INDEL 2018), 2018,
  • [10] Analysis of Stray Flux Spectral Components in Induction Machines under Rotor Bar Breakages at Various Locations
    Panagiotou, P. A.
    Arvanitakis, I
    Lophitis, N.
    Antonino-Daviu, J. A.
    Gyftakis, K. N.
    [J]. 2018 XIII INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2018, : 2345 - 2351
12345