High Frequency Signal Injection Method for Online Condition Monitoring of Electric Machines

被引:0
|
作者
Boler, Okan [1 ]
Sancar, Senol [1 ]
Sozer, Yilmaz [1 ]
De Abreu-Garcia, J. Alexis [1 ]
机构
[1] Univ Akron, ECE Dept, Akron, OH 44325 USA
关键词
motor condition assessment; high frequency current injection; structural capacitances; motor aging; BEARING CURRENTS;
D O I
暂无
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In this study, a new high frequency current injection method to assess the health condition of induction machines is proposed. The deterioration in the isolation material of an induction motor is determined by analyzing the high frequency response of the machine while considering the rotor-to-stator, rotor-to-frame, stator-to-frame, and bearings-to-frame structural capacitances. A machine model is built to simulate the effect of aging in the structural materials of the motor. The response of the motor is analyzed by simulating the effect of aging/deterioration as changes in the structural capacitances. Induction machines are used in the laboratory experiments. The experiments presented in this paper validate the proposed method and its feasibility.
引用
收藏
页码:5076 / 5080
页数:5
相关论文
共 50 条
  • [1] Online MOSFET Condition Monitoring for Inverter-Driven Electric Machines
    Jensen, William R.
    Foster, Shanelle N.
    PROCEEDINGS OF THE 2019 IEEE 12TH INTERNATIONAL SYMPOSIUM ON DIAGNOSTICS FOR ELECTRICAL MACHINES, POWER ELECTRONICS AND DRIVES (SDEMPED), 2019, : 398 - 404
  • [2] Online diagnostics in inverter-fed induction machines using high-frequency signal injection
    Briz, F
    Degner, MW
    Diez, AB
    Guerrero, JM
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2004, 40 (04) : 1153 - 1161
  • [3] The Low-Frequency Measuring Method and Signal Processing Application in Electrical Machines and Electric Devices Monitoring
    Jaraczewski, Marcin
    Mielnik, Ryszard
    Sulowicz, Maciej
    2016 13TH SELECTED ISSUES OF ELECTRICAL ENGINEERING AND ELECTRONICS (WZEE), 2016,
  • [4] Online Insulation Condition Monitoring of Traction Machines using Inverter Induced Voltage Injection
    Zoeller, C.
    Wolbank, Th. M.
    Vogelsberger, M. A.
    IECON 2015 - 41ST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2015, : 2456 - 2462
  • [5] Online Monitoring of Power Cables Tangent Delta Based on Low-Frequency Signal Injection Method
    Zhu, Guangya
    Zhou, Kai
    Lu, Lu
    Li, Yuan
    Xi, Hang
    Zeng, Qin
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2021, 70
  • [6] Condition monitoring of railway electric point machines
    Oyebande, BO
    Renfrew, AC
    IEE PROCEEDINGS-ELECTRIC POWER APPLICATIONS, 2002, 149 (06): : 465 - 473
  • [7] Modem condition monitoring techniques for electric machines
    Payne, BS
    Liang, B
    Ball, AD
    INTEGRATING DYNAMICS, CONDITION MONITORING AND CONTROL FOR THE 21ST CENTURY - DYMAC 99, 1999, : 325 - 330
  • [8] Towards enhancing insulation condition monitoring of electric machines using a signal processing based technique
    Barkat, B.
    Al-Musabi, N.
    Poshtan, M.
    2007 9TH INTERNATIONAL SYMPOSIUM ON SIGNAL PROCESSING AND ITS APPLICATIONS, VOLS 1-3, 2007, : 532 - 535
  • [9] Condition Monitoring and Fault Diagnosis Techniques of Electric Machines
    Nitish
    Singh, Amit Kr
    2019 3RD INTERNATIONAL CONFERENCE ON RECENT DEVELOPMENTS IN CONTROL, AUTOMATION & POWER ENGINEERING (RDCAPE), 2019, : 594 - 599
  • [10] Online stator winding fault diagnosis in inverter-fed AC machines using high-frequency signal injection
    Briz, F
    Degner, MW
    Zamarrón, A
    Guerrero, JM
    IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2003, 39 (04) : 1109 - 1117