Effect of Slab Reheating Temperature on Cold Rolling Texture Evolution of Nb-Containing Grain-Oriented Silicon Steel

Texture control of grain-oriented silicon steel is the key factor to ensure the magnetic properties of the finished product. Nb-containing grain-oriented silicon steel with different slab reheating temperatures was hot rolled followed by single-stage or two-stage cold rolling, and the textures were also analyzed. In the single-stage cold rolling process, as the slab reheating temperature is reduced, the intensity of the rotating cube texture {100} and Goss texture {011} drops, and that of the {111} texture increases. In the two-stage cold rolling process, with the decrease in the slab reheating temperature, the intensity of the {111} texture increases from 4.958 to 6.809. At the same slab reheating temperature, the intensity of the rotating cube texture declines more significantly in the two-stage cold rolling process. Finally, two-stage cold rolling with the slab reheating temperature of 1220 degrees C is found to be more beneficial for the formation of a sharp Goss texture during the second recrystallization. The magnetic induction intensity B800 of the final product is 1.87 T, and the iron loss P1.7/50 is 1.36 W/kg.