Turning of Inconel 718 by Cemented Carbides

被引：7
|
作者：
Mrkvica, Ivan [1 ]
Konderla, Ryszard [1 ]
Faktor, Miroslav [2 ]
机构：
[1] VSB Tech Univ Ostrava, 17 Listopadu 15-2172, Ostrava 70833, Czech Republic
[2] Univ Zilina, Zilina 01026, Slovakia
来源：
PRECISION MACHINING VI | 2012年 / 496卷
关键词：
turning; Inconel; 718; cemented carbide; tool wear; dry machining;
D O I：
10.4028/www.scientific.net/KEM.496.138
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This article deals with dry turning of nickel superalloy - Inconel 718. The different cemented carbides were applied for cutting process. These inserts were produced by Pramet Tools Ltd. company. This paper discusses durability of cutting inserts, the different intensity of tool wear at various cutting parameters. The most suitable cutting conditions are chosen in the scope of applied tools.
引用
收藏
页码：138 / +
页数：2
相关论文
共 50 条
  • [1] Assessment of cyclic utilization of coated cemented carbide inserts for turning of Inconel 718
    Yun, Hao
    Zou, Bin
    Wang, Jun
    Huang, Chuanzhen
    Shi, Zhenyu
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 112 (5-6): : 1583 - 1592
  • [2] Assessment of cyclic utilization of coated cemented carbide inserts for turning of Inconel 718
    Hao Yun
    Bin Zou
    Jun Wang
    Chuanzhen Huang
    Zhenyu Shi
    [J]. The International Journal of Advanced Manufacturing Technology, 2021, 112 : 1583 - 1592
  • [3] Broaching of Inconel 718 with cemented carbide
    Klocke, F.
    Vogtel, P.
    Gierlings, S.
    Lung, D.
    Veselovac, D.
    [J]. PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2013, 7 (06): : 593 - 600
  • [4] Grain boundary niobium carbides in Inconel 718
    Gao, M
    Wei, RP
    [J]. SCRIPTA MATERIALIA, 1997, 37 (12) : 1843 - 1849
  • [5] Grain boundary niobium carbides in Inconel 718
    Lehigh Univ, Bethlehem, United States
    [J]. Scripta Mater, 12 (1843-1849):
  • [6] Microstructures of oxidized primary carbides on superalloy Inconel 718
    Hong, JK
    Park, NK
    Kim, SJ
    Kang, CY
    [J]. NEW FRONTIERS OF PROCESSING AND ENGINEERING IN ADVANCED MATERIALS, 2005, 502 : 249 - 253
  • [7] High-speed turning of Inconel 718
    Uhlmann, E
    Ederer, G
    [J]. INDUSTRIAL DIAMOND REVIEW, 2001, 61 (03): : 169 - +
  • [8] Cutting data correction in Inconel 718 turning
    Zebala, Wojciech
    Slodki, Bogdan
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 65 (5-8): : 881 - 893
  • [9] Prediction of Residual Stresses in Turning of Inconel 718
    Torrano, Ivan
    Barbero, Oscar
    Kortabarria, Aitor
    Arrazola, Pedro Jose
    [J]. MODELLING OF MACHINING OPERATIONS, 2011, 223 : 421 - 430
  • [10] Cutting data correction in Inconel 718 turning
    Wojciech Zębala
    Bogdan Słodki
    [J]. The International Journal of Advanced Manufacturing Technology, 2013, 65 : 881 - 893
12345