Can a Simple Control Scheme Work for a Formation Control of Multiple Autonomous Underwater Vehicles?

被引:71
|
作者
Hou, Saing Paul [1 ]
Cheah, Chien Chern [1 ]
机构
[1] Nanyang Technol Univ, Sch Elect & Elect Engn, Singapore 639798, Singapore
关键词
Adaptive control; coordination control; multiple autonomous underwater vehicles (AUVs) systems; proportional and derivative (PD) control; shape control; MOBILE ROBOTS; ADAPTIVE-CONTROL; SHAPE CONTROL; MANIPULATOR; SYSTEMS; SWARM;
D O I
10.1109/TCST.2010.2076388
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The proportional and derivative (PD) and proportional, integral, and derivative (PID) controllers have been used extensively in industry due to their simplicity and effectiveness. This paper aims to investigate whether simple PD and adaptive PD-based controllers work for a complex system consisting of a group of multiple autonomous underwater vehicles (AUVs). Simple control laws with exact and uncertain gravity compensation are proposed for shape control of multiple AUVs. The proposed adaptive PD-based controller, in the presence of gravity uncertainty, requires only the model of gravity and buoyancy regressor matrix and does not require any knowledge of the inertia matrix, Coriolis and centripetal force, hydrodynamic damping and the parameters of the gravity, and buoyancy forces of the AUVs. Hence, the proposed controllers have the advantages of simplicity and ease of implementation. A novel collision and obstacle avoidance strategy using multi-layer region control concept, which limit the unnecessary use of high control efforts that lead to oscillatory movements of AUVs, is discussed. Lyapunov-like functions are proposed for the stability analysis. Simulation studies on AUVs with 6 degrees-of-freedom are presented to demonstrate the effectiveness of the proposed controllers.
引用
收藏
页码:1090 / 1101
页数:12
相关论文
共 50 条
  • [1] PD Control Scheme for Formation Control of Multiple Autonomous Underwater Vehicles
    Hou, S. P.
    Cheah, C. C.
    [J]. 2009 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS, VOLS 1-3, 2009, : 356 - 361
  • [2] DECENTRALIZED FORMATION CONTROL OF MULTIPLE AUTONOMOUS UNDERWATER VEHICLES
    Atta, Debabrata
    Subudhi, Bidyadhar
    [J]. INTERNATIONAL JOURNAL OF ROBOTICS & AUTOMATION, 2013, 28 (04): : 303 - 310
  • [3] Adaptive Formation Control of Multiple Underactuated Autonomous Underwater Vehicles
    Li, Ji-Hong
    Kang, Hyungjoo
    Kim, Min-Gyu
    Lee, Mun-Jik
    Cho, Gun Rae
    Jin, Han-Sol
    [J]. JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2022, 10 (09)
  • [4] Adaptive Distributed Formation Control of Multiple Autonomous Underwater Vehicles
    Emrani, Saba
    Dirafzoon, Alireza
    Talebi, Heidar A.
    [J]. 2011 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS (CCA), 2011, : 693 - 698
  • [5] A Review of the Path Planning and Formation Control for Multiple Autonomous Underwater Vehicles
    Behnaz Hadi
    Alireza Khosravi
    Pouria Sarhadi
    [J]. Journal of Intelligent & Robotic Systems, 2021, 101
  • [6] A Review of the Path Planning and Formation Control for Multiple Autonomous Underwater Vehicles
    Hadi, Behnaz
    Khosravi, Alireza
    Sarhadi, Pouria
    [J]. JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, 2021, 101 (04)
  • [7] Formation Control of Multiple Autonomous Underwater Vehicles Based on State Feedback
    Li, Y. -P.
    Yan, S. -X.
    [J]. 2014 11TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA), 2014, : 5523 - 5527
  • [8] Formation Control of Multiple Autonomous Underwater Vehicles Under Communication Delays
    Suryendu, Chhavi
    Subudhi, Bidyadhar
    [J]. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS, 2020, 67 (12) : 3182 - 3186
  • [9] Coordinated Formation Control of Multiple Autonomous Underwater Vehicles for Pipeline Inspection
    Xiang, Xianbo
    Jouvencel, Bruno
    Parodi, Olivier
    [J]. INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS, 2010, 7 (01): : 75 - 84
  • [10] Cooperative Control of Multiple Autonomous Underwater Vehicles
    He, Bin
    Jiang, Da Peng
    [J]. MACHINE DESIGN AND MANUFACTURING ENGINEERING II, PTS 1 AND 2, 2013, 365-366 : 905 - 912