Heat transfer characteristics of pin-fin heat sinks cooled by dual piezoelectric fans

被引:35
|
作者
Li, Hung-Yi [1 ]
Wu, Yu-Xian [1 ]
机构
[1] Huafan Univ, Dept Mechatron Engn, New Taipei 22301, Taiwan
关键词
Piezoelectric fan; Heat sink; Infrared thermography; Heat transfer enhancement; VIBRATING CANTILEVER PAIR; THERMAL PERFORMANCE; TRANSFER ENHANCEMENT; TIP GAP; SURFACE;
D O I
10.1016/j.ijthermalsci.2016.06.030
中图分类号
O414.1 [热力学];
学科分类号
摘要
The heat transfer of pin-fin heat sinks cooled by dual piezoelectric fans is investigated experimentally by infrared thermography. The effects of the phase difference, the configuration, the elevation of the piezoelectric fans, and the dimensions of the heat sinks on the thermal performance of the heat sinks are discussed. The experimental results show that the thermal resistance reaches the minimum (3.37 degrees C/W) when the fin width is 8 mm, the two piezoelectric fans are in edge-to-edge configuration, and the fans vibrate counter phase in a series of nine-fin heat sinks with a fin height of 15 mm. The minimum thermal resistance (2.4 degrees C/W) is obtained when the fin width is 5.1 mm and the two piezoelectric fans are in edge-to-edge configuration and vibrate counter phase in a series of sixteen-fin heat sinks with a fin height of 30 mm. The thermal resistance increases significantly when the elevation of the two piezoelectric fans is increased. The effects of the phase difference and the configuration of the two piezoelectric fans on thermal resistance depend on the dimensions of the heat sinks. However, for most tested heat sinks, the minimum thermal resistance is obtained when the two piezoelectric fans are in edge-to-edge configuration and vibrate counter phase. (C) 2016 Elsevier Masson SAS. All rights reserved.
引用
收藏
页码:26 / 35
页数:10
相关论文
共 50 条
  • [1] STUDY OF HEAT TRANSFER CHARACTERISTICS OF PERFORATED CIRCULAR PIN-FIN HEAT SINKS COOLED BY AN INCLINED IMPINGING JET
    Wen, Mao-Yu
    Ho, Ching-Yen
    [J]. JOURNAL OF ENHANCED HEAT TRANSFER, 2019, 26 (06) : 577 - 595
  • [2] The Effect of Micro Pin-Fin Shape on the Heat Transfer Performance of Micro Pin-Fin Heat Sinks
    Koz, Mustafa
    Kosar, Ali
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE 2010), VOL 10, 2012, : 387 - 393
  • [3] Flow and heat transfer characteristics and optimization study on the water-cooled microchannel heat sinks with dimple and pin-fin
    Li, Ping
    Luo, Yaoyuan
    Zhang, Di
    Xie, Yonghui
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 119 : 152 - 162
  • [4] Thermal-fluid characteristics of pin-fin heat sinks cooled by impinging jet
    Li, HY
    Chen, KY
    [J]. JOURNAL OF ENHANCED HEAT TRANSFER, 2005, 12 (02) : 189 - 201
  • [5] Mechanism of enhancement of heat transfer for plate-fin heat sinks with dual piezoelectric fans
    Ma, Sheng-Lun
    Chen, Jing-Wei
    Li, Hung-Yi
    Yang, Jing-Tang
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 90 : 454 - 465
  • [6] Optimization of vertical pin-fin heat sinks in natural convective heat transfer
    Iyengar, M
    Bar-Cohen, A
    [J]. HEAT TRANSFER 1998, VOL 3: GENERAL PAPERS, 1998, : 501 - 506
  • [7] Constructal heat transfer rate maximization for cylindrical pin-fin heat sinks
    Yang, Aibo
    Chen, Lingen
    Xie, Zhihui
    Feng, Huijun
    Sun, Fengrui
    [J]. APPLIED THERMAL ENGINEERING, 2016, 108 : 427 - 435
  • [8] STUDY OF HEAT CHARACTERISTICS FOR MICRO PIN-FIN HEAT SINKS WITH DIFFERENT STRUCTURES
    Kuang, Nailiang
    Lu, Guoran
    Li, Kui
    Kong, Yanmei
    Zheng, Jiangbin
    Jiao, Binbin
    [J]. THERMAL SCIENCE, 2024, 28 (2A): : 889 - 901
  • [9] STUDY OF HEAT CHARACTERISTICS FOR MICRO PIN-FIN HEAT SINKS WITH DIFFERENT STRUCTURES
    Kuang, Nailiang
    Lu, Guoran
    Li, Kui
    Kong, Yanmei
    Zheng, Jiangbin
    Jiao, Binbin
    [J]. THERMAL SCIENCE, 2024, 28 (02): : 889 - 901
  • [10] Design optimization for pin-fin heat sinks
    Chen, HT
    Chen, PL
    Horng, JT
    Hung, YH
    [J]. JOURNAL OF ELECTRONIC PACKAGING, 2005, 127 (04) : 397 - 406