A study of the effect of laser beam geometries on laser bending of sheet metal by buckling mechanism

Laser beans forming has emerged as a new and very promising technique to form sheet metal by thermal residual stresses The objective of this work is to investigate numerically the effect of rectangular beans geometries, with different transverse width to length aspect ratio, on laser bending process of thin metal sheets, which is dominated by buckling mechanism. In this paper, a comprehensive thermal and structural finite element (FE) analysis is conducted to investigate the effect that these laser beam geometries have on the process and on the final product characteristics. To achieve this, temperature distributions, deformations, plastic strains, stresses, and residual stresses produced by different beam geometries are compared The results suggest that beam geometries play an important role in the resulting temperature distributions on the workpiece Longer beam dimensions in the scanning direction (in relation to its lateral dimension) produce higher temperatures due to longer beam-material interaction time This affects the bending direction and the magnitude of the bending angles. Higher temperatures produce more plastic strains and hence higher deformation. This shows that the temperature-dependent yield stress plays a more dominant role in the deformation of the plate than the spread of the beam in the transverse direction. Also. longer beams have a tendency for the scanning line to curve away from its original position to form a concave shape. This is caused by buckling which develops tensile plastic strains along both ends of the scanning path The buckling effect produces the opposite curve profile, convex along the tranverse direction and concave along the scanning path. (C) 2010 Elsevier Ltd All rights reserved.