Geometry optimization of polycrystalline diamond tools for the milling of sintered ZrO2

被引：9
|
作者：
Warhanek, Maximilian [1 ]
Pfaff, Josquin [1 ]
Martin, Pablo [1 ]
Schonbachler, Lukas [1 ]
Boos, Jens [2 ]
Wegener, Konrad [1 ,2 ]
机构：
[1] Swiss Fed Inst Technol, Inst Machine Tools & Mfg IWF, Zurich, Switzerland
[2] Inspire AG Mechatron Prod Syst & Mfg Technol, Zurich, Switzerland
来源：
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING | 2016年 / 46卷
关键词：
Milling; Ceramic; Diamond Tool; FABRICATION; DESIGN; SYSTEM; EDM;
D O I：
10.1016/j.procir.2016.04.003
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Recent developments on tangential ultrashort-pulsed laser processing enable the generation of solid polycrystalline diamond composite tools with increasing geometric flexibility. To exploit this potential, an experimental study on the influence of the tool geometry on the cutting characteristics and the tool wear while milling sintered Zirconia dioxide is conducted. Three different tool geometries and a variation in rake and flank angles are produced to investigate the effects on processing forces and tool lifetime. The results are applied to the design of an end mill achieving 1.2 mm(3)/mm s specific material removal rate over a tool lifetime of 8000 mm(3)/mm. (C) 2016 The Authors. Published by Elsevier B.V
引用
收藏
页码：290 / 293
页数：4
相关论文
共 50 条
  • [1] Micromilling of sintered ZrO2 ceramic via cBN and diamond coated tools
    Romanus, Heleen
    Ferraris, Eleonora
    Bouquet, Jan
    Reynaerts, Dominiek
    Lauwers, Bert
    [J]. 6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 : 371 - 376
  • [2] Micro-milling of fully sintered ZrO2 Ceramics with Diamond coated end mills
    Bian, Rong
    Ferraris, Eleonora
    Qian, Jun
    Reynaerts, Dominiek
    Li, Liang
    He, Ning
    [J]. EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV, 2012, 523-524 : 87 - +
  • [3] Evaluation of Polycrystalline Diamond Tools in Milling of Pre-Sintered and Fully-Sintered Zirconia Ceramics
    Xu, Jinyang
    Ji, Min
    Li, Linfeng
    Chen, Ming
    [J]. JOURNAL OF SUPERHARD MATERIALS, 2022, 44 (01) : 62 - 69
  • [4] Evaluation of Polycrystalline Diamond Tools in Milling of Pre-Sintered and Fully-Sintered Zirconia Ceramics
    Min Jinyang Xu
    Linfeng Ji
    Ming Li
    [J]. Journal of Superhard Materials, 2022, 44 : 62 - 69
  • [5] Process investigation on meso-scale hard milling of ZrO2 by diamond coated tools
    Bian, Rong
    Ferraris, Eleonora
    He, Ning
    Reynaerts, Dominiek
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2014, 38 (01): : 82 - 91
  • [6] Tool Wear Characters in Micro-milling of Fully Sintered ZrO2 Ceramics by Diamond Coated End Mills
    Bian, Rong
    Ferraris, Eleonora
    Qian, Jun
    Reynaerts, Dominiek
    Li, Liang
    He, Ning
    [J]. HIGH SPEED MACHINING V, 2012, 723 : 365 - +
  • [7] Turning, Milling and Reaming with Polycrystalline Diamond Tools.
    Hobohm, Guenter
    [J]. Werkstatt und Betrieb, 1986, 119 (02): : 119 - 121
  • [8] Mechanism of Antiferroelectricity in Polycrystalline ZrO2
    Ganser, Richard
    Lomenzo, Patrick D.
    Collins, Liam
    Xu, Bohan
    Antunes, Luis Azevedo
    Mikolajick, Thomas
    Schroeder, Uwe
    Kersch, Alfred
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2024,
  • [9] Surface Quality in Meso Scale Milling of ZrO2 Ceramics with Diamond Coated End Mills
    Bian, R.
    Ferraris, E.
    Qian, J.
    Li, L.
    He, N.
    Reynaerts, D.
    [J]. PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON MULTI-MATERIAL MICRO MANUFACTURE (4M 2011), 2011, : 117 - 120
  • [10] Experimental investigation of end milling of titanium alloys with polycrystalline diamond tools
    Pan, Wencheng
    Kamaruddin, Adam
    Ding, Songlin
    Mo, John
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2014, 228 (08) : 832 - 844
12345