Improving the performance of a vibration neutraliser by actively removing damping

被引:26
|
作者
Kidner, M [1 ]
Brennan, MJ [1 ]
机构
[1] Univ Southampton, Inst Sound & Vibrat Res, Southampton SO17 1BJ, Hants, England
关键词
D O I
10.1006/jsvi.1998.2027
中图分类号
O42 [声学];
学科分类号
070206 ; 082403 ;
摘要
This paper describes the design of an active vibration neutraliser. The aim of the active element in the neutraliser is to reduce the internal damping of the device and thus make it more effective. Six different control configurations are considered and the input mechanical impedance of each configuration is calculated. This is used to assess the efficacy of each configuration. To study the behaviour of an active neutraliser a beam-like neutraliser is designed and built with piezoceramic patches providing the active element. An analytical model of this device is presented. Simulations and experimental results show that for two control configurations the amplitude of a mass-like structure with the neutraliser attached remains finite at a resonance of the composite system even when damping is entirely removed from the neutraliser, by the control system. (C) 1999 Academic Press.
引用
收藏
页码:587 / 606
页数:20
相关论文
共 50 条
  • [1] Improving the performance of a vibration neutraliser by controlling its stiffness and damping
    Brennan, M.J.
    Kidner, M.R.F.
    American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCA, 2000, 27 : 385 - 392
  • [3] Global control of vibration using a tunable vibration neutraliser
    Institute of Sound and Vibration Research, University of Southampton, Southampton, Hampshire, SO17 1BJ, United Kingdom
    Noise and Vibration Worldwide, 2001, 32 (05): : 21 - 28
  • [4] Improving the vibration damping capacity of cement
    Xuli Fu
    Xiaohui Li
    D. D. L. Chung
    Journal of Materials Science, 1998, 33 : 3601 - 3605
  • [5] Improving the vibration damping capacity of cement
    Fu, XL
    Li, XH
    Chung, DDL
    JOURNAL OF MATERIALS SCIENCE, 1998, 33 (14) : 3601 - 3605
  • [6] Controlling vibration propagation in a thin beam using a neutraliser
    Carneiro Jr, Jean P.
    Brennan, Michael J.
    Gonsalves, Paulo J. P.
    Sorokin, Vladislav S.
    Cleante, Vinicius G.
    Mace, Brian R.
    JOURNAL OF SOUND AND VIBRATION, 2025, 602
  • [7] A PERFORMANCE COMPARISON OF VIBRATION DAMPING MATERIALS
    HANSON, WJ
    HAMPEL, GA
    SOUND AND VIBRATION, 1984, 18 (07): : 22 - 34
  • [8] Control of flexural waves on a beam using a tunable vibration neutraliser
    Brennan, MJ
    JOURNAL OF SOUND AND VIBRATION, 1999, 222 (03) : 389 - 407
  • [9] IMPROVING SEISMIC PERFORMANCE: ADD STIFFNESS OR DAMPING?
    Kelly, Trevor E.
    BULLETIN OF THE NEW ZEALAND SOCIETY FOR EARTHQUAKE ENGINEERING, 2008, 41 (01): : 24 - 30
  • [10] Investigating the Optimal Damping Performance of a Composite Dynamic Vibration Absorber with Particle Damping
    Xiaofei Lei
    Chengjun Wu
    Journal of Vibration Engineering & Technologies, 2018, 6 : 503 - 511