Effect of geometric parameters on the behavior of bolted GFRP pultruded plates

被引:10
|
作者
Tajeuna, Therese A. D. [1 ]
Legeron, Frederic [2 ]
Langlois, Sebastien [1 ]
Labossiere, Pierre [1 ]
Demers, Marc [1 ]
机构
[1] Univ Sherbrooke, Dept Civil Engn, Sherbrooke, PQ J1K 2R1, Canada
[2] Parsons Corp, Abu Dhabi, U Arab Emirates
基金
加拿大自然科学与工程研究理事会;
关键词
Connection; bolt; pultruded GFRP; single-lap; FE analysis; failure mode; geometric parameters; GLASS POLYESTER MATERIAL; TENSION JOINTS; CONNECTIONS; FAILURE;
D O I
10.1177/0021998315625101
中图分类号
TB33 [复合材料];
学科分类号
摘要
This paper presents the effect of geometric parameters on the behavior of bolted glass fibre reinforced polymer (GFRP) pultruded plates for civil engineering applications. After a literature review, results of an experimental analysis investigating the behavior of GFRP-to-steel single-lap bolted connections are presented. Then, a finite element analysis validated by experimental data is used to evaluate the effects of the end-distance, side-distance, pitch, and plate properties on the strength and failure mode of the connection. A critical examination of geometric recommendations proposed in design references is presented. Bearing failure caused by contact of the bolt on the GFRP plate is usually defined as the preferred failure mode. With highly orthotropic plate, this type of failure was found to be less likely to occur when loading is applied in the pultruded direction. The investigation showed that the minimum end-distance and pitch-distance recommended by design references usually produce a connection with the maximum capacity. However, it was found that the minimum side-distance recommended by these references does not necessarily lead to the maximum capacity for one bolt and for two bolt in a column connections.
引用
收藏
页码:3731 / 3749
页数:19
相关论文
共 50 条
  • [1] Bolted connections of pultruded GFRP: Implications of geometric characteristics on net section failure
    Coelho, Ana M. Girao
    Mottram, J. Toby
    Harries, Kent A.
    [J]. COMPOSITE STRUCTURES, 2015, 131 : 878 - 884
  • [2] Relaxation behavior of clamping force in bolted joints of pultruded GFRP laminates
    Kishima, Takeshi
    Katsuno, Toshio
    Kobayashi, Kenji
    Hino, Shin-Ichi
    Nishizaki, Itaru
    [J]. Zairyo/Journal of the Society of Materials Science, Japan, 2010, 59 (07) : 540 - 545
  • [3] Effect of clamping force on the strength of bolted joints in pultruded GFRP laminates
    Public Works Res. Inst., Minamihara, Tsukuba, 305-8516
    [J]. Zairyo, 2007, 11 (999-1004):
  • [4] Structural behavior of double-lap joints of steel splice plates bolted/bonded to pultruded hybrid CFRP/GFRP laminates
    Nguyen Duc Hai
    Mutsuyoshi, Hiroshi
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2012, 30 : 347 - 359
  • [5] Static and Fatigue Behavior of Thick Pultruded GFRP Plates with Surface Damage
    Tanaka, Yoshiki
    Murakoshi, Jun
    Nagaya, Yuko
    Watanabe, Tetsuya
    [J]. JOURNAL OF BRIDGE ENGINEERING, 2009, 14 (02) : 102 - 111
  • [6] Effect of geometric discontinuities on failure of pultruded GFRP columns in axial compression
    Kim, Yail J.
    Qian, Kenny Zongxi
    [J]. COMPOSITE STRUCTURES, 2016, 136 : 171 - 181
  • [7] Effect of geometric parameters on the mechanical behavior of PFRP single bolted connection
    Lee, Young-Geun
    Choi, Eunsoo
    Yoon, Soon-Jong
    [J]. COMPOSITES PART B-ENGINEERING, 2015, 75 : 1 - 10
  • [8] Effects of corrosive environments on properties of pultruded GFRP plates
    Feng, Peng
    Wang, Jie
    Wang, Yi
    Loughery, David
    Niu, Ditao
    [J]. COMPOSITES PART B-ENGINEERING, 2014, 67 : 427 - 433
  • [9] Effects of corrosive environments on properties of pultruded GFRP plates
    [J]. Feng, Peng, 1600, Elsevier Ltd (67):
  • [10] Analysis and behavior of pultruded FRP bolted connections
    Steffen, RE
    Haj-Ali, R
    Zureick, AH
    [J]. MATERIALS AND CONSTRUCTION: EXPLORING THE CONNECTION, 1999, : 76 - 83