In Vitro Degradation of PLCL/nHA Biodegradable Scaffolds

被引:13
|
作者
Diaz, E. [1 ]
Puerto, I. [1 ]
机构
[1] Univ Pais Vasco UPV EHU, Escuela Tecn Super Naut & Maquinas Navales, Dept Ingn Minera Met & Ciencia Mat, Portugalete 48920, Spain
关键词
Biodegradable polymer; Degradation; In vitro; Nanohydroxyapatite; pH; Scaffolds;
D O I
10.1080/03602559.2014.961087
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
We investigated the effect of bioactive nanoparticles on the in-vitro degradation of PLCL and PLCL/nHA composite scaffolds. The concentration of nanohydroxyapatite significantly affected the degradation rate. An increase in the crystallinity of the amorphous portion of the polymer was observed. This increased crystallinity was more pronounced in the pure PLCL samples than in those with more nHA. During the degradation process, we observed the appearance of multiple micropores on the scaffold walls as the hydrolysis process progressed and, by the sixth week, the remains of the degradation products were visible on the pore walls.
引用
收藏
页码:556 / 564
页数:9
相关论文
共 50 条
  • [1] In Vitro Degradation of PLLA/nHA Composite Scaffolds
    Diaz, E.
    Sandonis, I.
    Puerto, I.
    Ibanez, I.
    [J]. POLYMER ENGINEERING AND SCIENCE, 2014, 54 (11): : 2571 - 2578
  • [2] The Influence of Copolymer Composition on PLGA/nHA Scaffolds' Cytotoxicity and In Vitro Degradation
    Diaz, Esperanza
    Puerto, Igor
    Ribeiro, Silvie
    Lanceros-Mendez, Senentxu
    Manuel Barandiarian, Jose
    [J]. NANOMATERIALS, 2017, 7 (07)
  • [3] Additive manufacture of PCL/nHA scaffolds reinforced with biodegradable continuous Fibers: Mechanical Properties, in-vitro degradation Profile, and cell study
    Hedayati, Seyyed Kaveh
    Behravesh, Amir Hossein
    Hasannia, Sadegh
    Kordi, Omid
    Pourghaumi, Majid
    Saed, Arvin Bagheri
    Gashtasbi, Fatemeh
    [J]. European Polymer Journal, 2022, 162
  • [4] Additive manufacture of PCL/nHA scaffolds reinforced with biodegradable continuous Fibers: Mechanical Properties, in-vitro degradation Profile, and cell study
    Hedayati, Seyyed Kaveh
    Behravesh, Amir Hossein
    Hasannia, Sadegh
    Kordi, Omid
    Pourghaumi, Majid
    Saed, Arvin Bagheri
    Gashtasbi, Fatemeh
    [J]. EUROPEAN POLYMER JOURNAL, 2022, 162
  • [5] Evaluation of physicochemical and mechanical properties with the in vitro degradation of PCL/nHA/MWCNT composite scaffolds
    Diaz, Esperanza
    Aresti, Jon
    Leon, Joseba
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2021, 40 (3-4) : 134 - 142
  • [6] In vitro and in vivo degradation behavior and the long-term performance of biodegradable PLCL balloon implants
    Zada, Moran Haim
    Kumar, Awanish
    Elmalak, Omar
    Markovitz, Elana
    Icekson, Ruthy
    Domb, Abraham J.
    [J]. INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2020, 574
  • [7] In Vitro Degradation of PHBV Scaffolds and nHA/PHBV Composite Scaffolds Containing Hydroxyapatite Nanoparticles for Bone Tissue Engineering
    Sultana, Naznin
    Khan, Tareef Hayat
    [J]. JOURNAL OF NANOMATERIALS, 2012, 2012
  • [8] PLLA/nHA Composite Films and Scaffolds for Medical Implants: In Vitro Degradation, Thermal and Mechanical Properties
    Diaz, Esperanza
    Molpeceres, Ane Libe
    Sandonis, Iban
    Puerto, Igor
    [J]. JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS, 2019, 29 (01) : 121 - 131
  • [9] PLLA/nHA Composite Films and Scaffolds for Medical Implants: In Vitro Degradation, Thermal and Mechanical Properties
    Esperanza Díaz
    Ane Libe Molpeceres
    Iban Sandonis
    Igor Puerto
    [J]. Journal of Inorganic and Organometallic Polymers and Materials, 2019, 29 : 121 - 131
  • [10] Manufacture of elastic biodegradable PLCL scaffolds for mechano-active vascular tissue engineering
    Jeong, SI
    Kim, SH
    Kim, YH
    Jung, Y
    Kwon, JH
    Kim, BS
    Lee, YM
    [J]. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION, 2004, 15 (05) : 645 - 660