Flexural performance of RC beams strengthened with near surface mounted CFRP strips

The near surface mounted (NSM) fiber reinforced polymer (FRP) reinforcement is emerging as a promising alternative strengthening technique to externally bonded reinforcement (EBR) for increasing the load carrying capacity of reinforced concrete (RC) members. NSM FRP technique has several advantages, in comparison with the EBR method, such as reducing the risk of debonding, and a better protection from the external sources of damage. In this research, the performance and effectiveness of the NSM and EBR techniques for the flexural strengthening of RC beams are compared. In order to achieve this objective, six full-scale, RC beams were strengthened with different carbon FRP (CFRP) schemes and tested. Such beams were designed to fail in a flexural mode. Test results indicated that if the same amount of CFRP is used, beams strengthened with NSM strips achieved higher ultimate load than those strengthened with EBR. Such increase in the ultimate load ratio ranged between 12% and 18%. Furthermore, a design approach for computing the moment capacity of RC flexural members strengthened with NSM CFRP strips is developed and presented in this paper. (C) 2016 Faculty of Engineering, Alexandria University. Production and hosting by Elsevier B.V.