Development of mathematical model for material removal and surface roughness in electrolytic magnetic abrasive finishing process

被引：4
|
作者：
Pandey, Nitesh [1 ]
Singh, Rajnish [2 ]
Pant, Piyush [3 ]
Yadav, Anshul [2 ]
机构：
[1] Shri Ramswaroop Mem Univ, Dept Mech Engn, Lucknow, Uttar Pradesh, India
[2] Kamla Nehru Inst Technol, Dept Mech Engn, Sultanpur, India
[3] Jadavpur Univ, Dept Mech Engn, Kolkata, India
来源：
1ST INTERNATIONAL CONFERENCE ON CONTEMPORARY RESEARCH IN MECHANICAL ENGINEERING WITH FOCUS ON MATERIALS AND MANUFACTURING (ICCRME-2018) | 2018年 / 404卷
关键词：
CORROSION; WEAR;
D O I：
10.1088/1757-899X/404/1/012053
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Electrolytic magnetic abrasive finishing is a hybrid machining process which takes into account both electrolytic & magnetic abrasive finishing process. It is a high efficiency finishing process which is used for advanced engineering materials like super alloys, metal matrix composites and ceramics. In this study mathematical modeling of material removal has been performed by considering the effect of electrode gap on material removal and then surface roughness model has been developed by assuming the surface profile as triangular. This research also investigates the interaction between various input process and their effect on process output characteristics like MRR and surface finish. The simulated data has been validated with the previous literature result which were found to be in good agreement.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Material removal rate and surface roughness of the magnetic-abrasive process
    Kremen, G.
    Elsayed, E.A.
    Feygin, S.
    Igelshteyn, L.
    [J]. Technical Paper - Society of Manufacturing Engineers. MR, 1999, (MR99-245): : 1 - 15
  • [2] Mathematical Modeling of Material Removal and Surface Roughness in Ultrasonic-Assisted Magnetic Abrasive Flow Machining Process
    Dixit, Nitin
    Sharma, Varun
    Kumar, Pradeep
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2022, 144 (12):
  • [3] Modeling of material removal in magnetic abrasive finishing process with spherical magnetic abrasive powder
    Gao, Yuewu
    Zhao, Yugang
    Zhang, Guixiang
    Yin, Fengshi
    Zhang, Haiyun
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 177
  • [4] Effect of Lubricant Volume and Working Gap on the Surface Roughness and Material Removal Rate in Magnetic Abrasive Finishing
    Vahdati, M.
    Sadeghinia, E.
    Shokuhfar, A.
    [J]. DIFFUSION IN SOLIDS AND LIQUIDS V, PTS 1 AND 2, 2010, 297-301 : 390 - 395
  • [5] Optimization of process parameters affecting surface roughness in magnetic abrasive finishing process
    Ahmad, Shadab
    Gangwar, Swati
    Yadav, Prabhat Chand
    Singh, D. K.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (15) : 1723 - 1729
  • [6] Surface roughness modelling for Double Disk Magnetic Abrasive Finishing process
    Kala, Prateek
    Sharma, Varun
    Pandey, Pulak M.
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2017, 25 : 37 - 48
  • [7] Modeling of material removal in ultrasonic assisted magnetic abrasive finishing process
    Misra, Aviral
    Pandey, Pulak M.
    Dixit, U. S.
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2017, 131 : 853 - 867
  • [8] Study on magnetic abrasive finishing combined with electrolytic process
    Sun, Xu
    Zou, Yanhua
    [J]. International Journal of Abrasive Technology, 2019, 9 (02) : 129 - 137
  • [9] Electrolytic magnetic abrasive finishing
    Yan, BH
    Chang, GW
    Cheng, TJ
    Hsu, RT
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (13): : 1355 - 1366
  • [10] Modeling of material removal and surface roughness in abrasive flow machining process
    Jain, Rajendra K.
    Jain, Vijay K.
    Dixit, P.M.
    [J]. International Journal of Machine Tools and Manufacture, 1999, 39 (12): : 1903 - 1923
12345