EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF THE HEAT TRANSFER AND FLOW FIELD IN A TRAILING EDGE COOLING GEOMETRY. PART2: LES AND HYBRID RANS/LES STUDY

被引:0
|
作者
Ivanova, Elizaveta [1 ]
Ledezma, Gustavo [1 ]
Wang, Guanghua [1 ]
Laskowski, Gregory M. [2 ]
机构
[1] GE Global Res, Thermal Syst Org, Niskayuna, NY 12309 USA
[2] GE Aviat, Thermal Syst Design, Lynn, MA USA
关键词
CUTBACK; SIMULATION;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper presents the results of a numerical study on the predictive capabilities of Large Eddy Simulation (LES) and hybrid RANS/LES methods for heat transfer in the trailing edge (TE) geometry experimentally investigated in Part I. The experimental validation data includes 2D wall contours and laterally-averaged values of adiabatic cooling effectiveness. The simulations were conducted at three different blowing ratio values. The comparison with the experimental data shows a general advantage of LES and hybrid RANS/LES methods against steady-state RANS. The results obtained by means of the WALE LES model and the Improved Delayed Detached Eddy Simulation (IDDES) hybrid RANS/LES method were comparable. The presented grid dependence study shows the importance of adequate grid resolution for the predictive capabilities of trailing edge cooling LES. Furthermore, the importance of considering TE slot lands simulation quality in the numerical method assessment is discussed. Potential directions of future research needed to improve simulation reliability are outlined.
引用
收藏
页数:9
相关论文
共 16 条
  • [1] EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF THE HEAT TRANSFER AND FLOW FIELD IN A TRAILING EDGE COOLING GEOMETRY PART 1: EXPERIMENTAL STUDY WITH IR THERMOGRAPHY AND PIV
    Wang, Guanghua
    Estevadeordal, Jordi
    DeLancey, James
    Bailey, Jeremy
    Kopriva, James
    Laskowski, Gregory
    ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 5B, 2015,
  • [2] IMPACT OF SWIRL FLOW ON COMBUSTOR LINER HEAT TRANSFER AND COOLING - A NUMERICAL INVESTIGATION WITH HYBRID RANS-LES MODELS
    Mazzei, L.
    Andreini, A.
    Facchini, B.
    Turrini, F.
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 5C, 2015,
  • [3] LES and Hybrid LES/RANS Study of Flow and Heat Transfer around a Wall-Bounded Short Cylinder
    Borello, D.
    Delibra, G.
    Hanjalic, K.
    Rispoli, F.
    PROGRESS IN TURBULENCE III, 2010, 131 : 147 - 150
  • [4] Experimental and numerical investigations of internal heat transfer in an innovative trailing edge blade cooling system: stationary and rotation effects, part 2: numerical results
    Ahmed Beniaiche
    Adel Ghenaiet
    Carlo Carcasci
    Bruno Facchini
    Heat and Mass Transfer, 2017, 53 : 491 - 505
  • [5] Numerical simulation of turbulent flow and heat transfer over rotating disks using a hybrid LES-RANS method
    Kappis, L.
    Turnow, J.
    Kornev, N.
    TURBULENCE HEAT AND MASS TRANSFER 9 (THMT-18), 2018, : 625 - 634
  • [6] Experimental and numerical investigations of internal heat transfer in an innovative trailing edge blade cooling system: stationary and rotation effects, part 1-experimental results
    Beniaiche, Ahmed
    Ghenaiet, Adel
    Facchini, Bruno
    HEAT AND MASS TRANSFER, 2017, 53 (02) : 475 - 490
  • [7] Comparative Study of DNS, LES and Hybrid LES/RANS of Turbulent Boundary Layer with Heat Transfer Over 2d Hill
    H. Hattori
    T. Umehara
    Y. Nagano
    Flow, Turbulence and Combustion, 2013, 90 : 491 - 510
  • [8] Comparative Study of DNS, LES and Hybrid LES/RANS of Turbulent Boundary Layer with Heat Transfer Over 2d Hill
    Hattori, H.
    Umehara, T.
    Nagano, Y.
    FLOW TURBULENCE AND COMBUSTION, 2013, 90 (03) : 491 - 510
  • [9] Study of the heat transfer deterioration of supercritical CO2 in vertical pipes using a hybrid RANS/LES method
    Zhang, Kaidi
    Lu, Mingjian
    Sun, Yuwei
    Wu, Qiang
    Wei, Wei
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2023, 185
  • [10] A Comparative Numerical Study of Aerodynamics and Heat Transfer on Transitional Flow Around a Highly Loaded Turbine Blade with Flow Separation Using RANS, URANS and LES
    Schobeiri, Meinhard T.
    Nikparto, Ali
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 5C, 2014,