Mesoscopic Modeling Approach and Application for Steel Fiber Reinforced Concrete under Dynamic Loading: A Review

Steel fiber reinforced concrete (SFRC) has drawn extensive attention in recent years for its superior mechanical response to dynamic and impact loadings. Based on the existing test results, the high-strength steel fibers embedded in a concrete matrix usually play a strong bridging effect to enhance the bonding force between fiber and the matrix, and directly contribute to the improvement of the post-cracking behavior and residual strength of SFRC. To gain a better understanding of the action behavior of steel fibers in matrix and further capture the failure mechanism of SFRC under dynamic loads, the mesoscopic modeling approach that assumes SFRC to be composed of different mesoscale phases (i.e., steel fibers, coarse aggregates, mortar matrix, and interfacial transition zone (ITZ)) has been widely employed to simulate the dynamic responses of SFRC material and structural members. This paper presents a comprehensive review of the state-of-the-art mesoscopic models and simulations for SFRC under dynamic loading. Generation approaches for the SFRC mesoscale model in the simulation works, including steel fiber, coarse aggregate, and the ITZ between them, are reviewed and compared systematically. The material models for different phases and the interaction relationship between fiber and concrete matrix are summarized comprehensively. Additionally, some example applications for SFRC under dynamic loads (i.e., compression, tension, and contact blast) simulated using the general mesoscale models are given. Finally, some critical analysis on the current shortcomings of the mesoscale modeling of SFRC is highlighted, which is of great significance for the future investigation and development of SFRC. (C) 2022 THE AUTHORS. Published by Elsevier LTD on behalf of Chinese Academy of Engineering and Higher Education Press Limited Company.