On some characteristics of microstructure and defects in die-cast magnesium components

被引：1
|
作者：
Cao, HP [1 ]
机构：
[1] Jonkoping Univ, Div Component Technol, S-551 Jonkoping, Sweden
来源：
MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS | 2005年 / 488-489卷
关键词：
microstructure; Die casting; segregation; band defect;
D O I：
10.4028/www.scientific.net/MSF.488-489.283
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Some commercial Mg components have been die cast at various casting conditions. The influence of process parameter settings on the microstructural features as well as one kind of defect called segregation band defect were investigated. It was found that more pre-solidified crystals were formed in the condition of lower casting temperature, and more broken dendrites and spherical crystals were formed under higher injection speed. The distribution characters of pre-solidified crystals were also presented and discussed in this paper. Concerning the band defects formed during die casting, a variety of segregation band morphologies as well as the influence of various casting conditions the performances on bands was presented. It was found out that intensification pressure has the strongest effect on the performance of segregation bands inside the castings.
引用
收藏
页码：283 / 286
页数：4
相关论文
共 50 条
  • [1] Fatigue strength of die-cast magnesium components
    Renner, F
    Zenner, H
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2002, 25 (12) : 1157 - 1168
  • [2] Characteristics of microstructure and banded defects in die cast AM50 magnesium components
    Cao, H
    Wessén, M
    [J]. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2005, 18 (06) : 377 - 384
  • [3] THE INTERGRANULAR MICROSTRUCTURE OF MAGNESIUM BASED DIE-CAST AE ALLOYS
    Wei, Kun
    Wei, Liu-Ying
    Warren, Richard
    [J]. MAGNESIUM TECHNOLOGY 2009, 2009, : 261 - 266
  • [4] Martensite in die-cast magnesium alloy?
    Wei, Ying-hui
    Hou, Li-feng
    Xu, Bing-she
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 467 (1-2) : 130 - 134
  • [5] Die-cast magnesium digital camera
    Ashley, S
    [J]. MECHANICAL ENGINEERING, 1997, 119 (01) : 28 - 28
  • [6] Fatigue of die-cast magnesium alloys
    Potzies, C
    Kainer, KU
    [J]. MAGNESIUM TECHNOLOGY 2004, 2004, : 275 - 278
  • [7] Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys
    Palash Poddar
    Arpan Das
    K. L. Sahoo
    [J]. Metallurgical and Materials Transactions A, 2014, 45 : 2270 - 2283
  • [8] Mechanisms of segregation band defect formation in pressure die-cast magnesium components
    Cao, HP
    Wessén, M
    [J]. MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS, 2005, 488-489 : 381 - 384
  • [9] The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys
    Dargusch, MS
    Bowles, AL
    Pettersen, K
    Bakke, P
    Dunlop, GL
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (06): : 1905 - 1909
  • [10] Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys
    Poddar, Palash
    Das, Arpan
    Sahoo, K. L.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (04): : 2270 - 2283
12345