W-Cu/Cu composite electrodes fabricated via laser surface alloying

被引：22
|
作者：
Xie, Hongbin [1 ,2 ]
Guan, Weimian [1 ,2 ]
Lv, Hao [1 ,2 ]
Yang, Huiya [1 ,2 ]
Gao, Mingyu [1 ,2 ]
Fang, Youtong [2 ]
Liu, Jiabin [1 ,2 ]
Wang, Hongtao [2 ]
机构：
[1] Zhejiang Univ, Sch Mat Sci & Engn, Hangzhou 310027, Peoples R China
[2] Zhejiang Univ, Ctr X Mech, Fac Engn, Hangzhou 310027, Peoples R China
来源：
MATERIALS CHARACTERIZATION | 2022年 / 185卷
基金：
中国国家自然科学基金;
关键词：
W-Cu composite; Microstructure; Laser surface alloying; Arc ablation; CU COMPOSITES; MICROSTRUCTURE EVOLUTION; POWDERS; DENSIFICATION; RESISTANCE; MICRO; FE;
D O I：
10.1016/j.matchar.2021.111715
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
It is a long-term requirement to reduce the arc ablation rate and the W content of W-Cu composites. In this work, laser surface alloying was employed to prepare a novel W-Cu/Cu composite that contained a high W content on the surface but a low W content for the whole composite. The new W-Cu electrode exhibited a lower arc ablation rate than the commercial one. The underlying mechanism was attributed to the higher thermal conductivity of the new W-Cu/Cu composite with the low W consumption as a whole. This study opens a door to overcome the trade-off of the ablation resistance and W consumption of the W-Cu electrodes.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Densified W-Cu composite fabricated via laser additive manufacturing
    Su, Shuang
    Lu, Yunzhuo
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2020, 87 (87):
  • [2] Microstructure, thermal physical property and surface morphology of W-Cu composite fabricated via selective laser melting
    Yan, Anru
    Wang, Zhiyong
    Yang, Tiantian
    Wang, Yanling
    Ma, Zhihong
    MATERIALS & DESIGN, 2016, 109 : 79 - 87
  • [3] Sintering behavior of nanostructured W-Cu alloys fabricated by mechanical alloying
    Kim, JC
    Ryu, SS
    Kim, EP
    Moon, IH
    ADVANCES IN POWDER METALLURGY & PARTICULATE MATERIALS - 1997, 1997, : 1213 - 1219
  • [4] Laser cladding of W-Cu composite on bronze substrate
    Wang, SH
    Xue, LJ
    SURFACE ENGINEERING IN MATERIALS SCIENCE III, 2005, : 27 - 36
  • [5] Mechanical alloying of the immiscible system W-Cu
    Aboud, T
    Weiss, BZ
    Chaim, R
    NANOSTRUCTURED MATERIALS, 1995, 6 (1-4): : 405 - 408
  • [6] Effects of Cu content and mechanical alloying parameters on the preparation of W-Cu composite coatings on copper substrate
    Meng, Yunfei
    Shen, Yifu
    Chen, Cheng
    Li, Yongcan
    Feng, Xiaomei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 585 : 368 - 375
  • [7] Laser 3D printing of W-Cu composite
    Liu, Zhenghong
    Zhou, Wenchao
    Lu, Yunzhuo
    Xu, Huidong
    Qin, Zuoxiang
    Lu, Xing
    MATERIALS LETTERS, 2018, 225 : 85 - 88
  • [8] Grain growth in the nanocrystalline W-Cu and Cu-Pb composite powders prepared by mechanical alloying
    Moon, IH
    Ryu, SS
    Kim, SW
    Won, DM
    Jang, WS
    ZEITSCHRIFT FUR METALLKUNDE, 2001, 92 (08): : 986 - 994
  • [9] Grain Growth in the Nanocrystalline W-Cu and Cu-Pb Composite Powders Prepared by Mechanical Alloying
    Moon, In Hyung
    Ryu, Sung-Soo
    Kim, Soon-Wook
    Won, Dong Mook
    Jang, Won Suck
    2001, Walter de Gruyter GmbH (92)
  • [10] Effect of W Content on Microstructure and Thermophysical Properties of W-Cu Composites Fabricated via Selective Laser Melting
    Yan Anru
    Liu Xuesheng
    Wang Zhiyong
    He Dingyong
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2019, 46 (07):
12345