Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator

被引：61

作者：

Kotcioglu, Isak ^{[2
]}

Caliskan, Sinan ^{[1
]}

Cansiz, Ahmet ^{[3
]}

Baskaya, Senol ^{[4
]}

机构：

[1] Univ Hitit, Dept Mech Engn, Fac Engn, TR-19030 Corum, Turkey

[2] Ataturk Univ, Dept Mech Engn, Fac Engn, TR-25240 Erzurum, Turkey

[3] Ataturk Univ, Dept Elect Elect Engn, Fac Engn, TR-25240 Erzurum, Turkey

[4] Gazi Univ, Dept Mech Engn, Fac Engn & Architecture, TR-06570 Ankara, Turkey

来源：

ENERGY | 2010年 / 35卷 / 09期

关键词：

Vortex generators; Cross-flow heat exchanger; epsilon-NTLU; Entropy generation; ENTROPY GENERATION; THERMODYNAMIC OPTIMIZATION; MASS-TRANSFER; PERFORMANCE;

D O I：

10.1016/j.energy.2010.05.014

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In this paper a second law analysis of a cross-flow heat exchanger (HX) is studied in the presence of a balance between the entropy generation due to heat transfer and fluid friction. The entropy generation in a cross-flow HX with a new winglet-type convergent divergent longitudinal vortex generator (CDLVG) is investigated. Optimization of HX channel geometry and effect of design parameters regarding the overall system performance are presented. For the HX flow lengths and CDLVGs the optimization model was developed on the basis of the entropy generation minimization (EGM). It was found that increasing the cross-flow fluid velocity enhances the heat transfer rate and reduces the heat transfer irreversibility. The test results demonstrate that the CDLVGs are potential candidate procedure to improve the disorderly mixing in channel flows of the cross-flow type HX for large values of the Reynolds number. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：3686 / 3695

页数：10

共 50 条

[1] Experimental investigation of heat transfer in a channel with new winglet-type vortex generators
Caliskan, S.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 78 : 604 - 614
[2] Second-law and experimental analysis of a cross-flow heat exchanger
Ogulata, RT
Doba, F
Yilmaz, T
[J]. HEAT TRANSFER ENGINEERING, 1999, 20 (02) : 20 - 27
[3] Heat transfer enhancement by winglet-type vortex generator arrays in compact plain-fin-and-tube heat exchangers
Joardar, A.
Jacobi, A. M.
[J]. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2008, 31 (01): : 87 - 97
[4] Air-Side Heat-Transfer Enhancement by a New Winglet-Type Vortex Generator Array in a Plain-Fin Round-Tube Heat Exchanger
He, J.
Liu, L.
Jacobi, A. M.
[J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2010, 132 (07): : 1 - 9
[5] AIR-SIDE HEAT TRANSFER ENHANCEMENT BY A NOVEL WINGLET-TYPE VORTEX GENERATOR ARRAY IN A ROUND-TUBE PLAIN-FIN HEAT EXCHANGER
He, Jing
Liu, Liping
Jacobi, Anthony M.
[J]. HT2009: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE 2009, VOL 1, 2009, : 575 - 582
[6] Heat transfer and flow characteristics of fin-tube bundles with and without winglet-type vortex generators
Kwak, KM
Torii, K
Nishino, K
[J]. EXPERIMENTS IN FLUIDS, 2002, 33 (05) : 696 - 702
[7] FLOW AND HEAT TRANSFER FROM THE ANNULAR FIN HEAT EXCHANGER USING WINGLET TYPE VORTEX GENERATORS
Rana, Basanta Kumar
Dalal, Amaresh
Biswas, Gautam
[J]. PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE - 2013, VOL 2, 2014,
[8] Heat transfer and flow characteristics of fin-tube bundles with and without winglet-type vortex generators
K. Kwak
K. Torii
K. Nishino
[J]. Experiments in Fluids, 2002, 33 : 696 - 702
[9] Analysis of heat transfer and pressure drop for fin-and-tube heat exchangers with rectangular winglet-type vortex generators
He, Ya-Ling
Chu, Pan
Tao, Wen-Quan
Zhang, Yu-Wen
Xie, Tao
[J]. APPLIED THERMAL ENGINEERING, 2013, 61 (02) : 770 - 783
[10] Numerical study of heat-transfer enhancement by punched winglet-type vortex generator arrays in fin-and-tube heat exchangers
He, Y. L.
Han, H.
Tao, W. Q.
Zhang, Y. W.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (21-22) : 5449 - 5458

← 1 2 3 4 5 →