Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel

被引：4

作者：

Bang, HanSur ^{[1
]}

Bang, HeeSeon ^{[1
]}

Na, M. J. ^{[2
]}

Jeon, G. H. ^{[2
]}

Kim, G. -S. ^{[2
]}

Kim, B. R. ^{[2
]}

机构：

[1] Chosun Univ, Dept Welding & Joining Sci Engn, Gwangju, South Korea

[2] Chosun Univ, Grad Sch, Dept Welding & Joining Sci Engn, Gwangju, South Korea

来源：

STRENGTH OF MATERIALS | 2016年 / 48卷 / 01期

关键词：

Nd:YAG laser-MIG hybrid; Taguchi analysis; galvanized steel; ultimate tensile strength; welding depth and width ratio; hardness; BEAD GEOMETRY; QUALITY;

D O I：

10.1007/s11223-016-9749-0

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This study aims to establish the weld quality of the Nd:YAG laser-MIG hybrid welding on galvanized steel (SGACC60). In order to do so, the Taguchi analysis optimized the laser-arc hybrid welding process for SGACC60 by varying four parameters: welding speed, welding current, laser-arc distance and shielding gas. The experiment produced 18 combinations of these four essential welding parameters, which were estimated in terms of ultimate tensile strength, welding depth and width ratio, and hardness. The optimum result exhibited that the tensile strength of welds was approximately 101% of that of the base metal, and that their hardness was within the acceptable range (the maximum value 350 Hv).

引用

页码：146 / 151

页数：6

共 50 条

[1] Application of Taguchi Approach to Optimize Laser-Arc Hybrid Welding Parameters of Galvanized Steel
HanSur Bang
HeeSeon Bang
M. J. Na
G. H. Jeon
G.-S. Kim
B. R. Kim
[J]. Strength of Materials, 2016, 48 : 146 - 151
[2] Laser-arc hybrid welding process of galvanized steel sheets
Matsusaka, Souta
Uezono, Toshiro
Tsumura, Takuya
Tanaka, Manabu
Watanabe, Takehiro
[J]. ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 355 - +
[3] A practical approach for increasing penetration in hybrid laser-arc welding of steel
Farrokhi, Farhang
Kristiansen, Morten
[J]. LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016, 2016, 83 : 577 - 586
[4] Laser-arc hybrid welding of thick HSLA steel
Bunaziv, Ivan
Alcselsen, Odd M.
Frostevarg, Jan
Kaplan, Alexander F. H.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 259 : 75 - 87
[5] Laser-arc hybrid welding
Katayama, Seiji
Naito, Yasuaki
Uchiumi, Satoru
Mizutani, Masami
[J]. DESIGNING OF INTERFACIAL STRUCTURES IN ADVANCED MATERIALS AND THEIR JOINTS, 2007, 127 : 295 - +
[6] Welding properties of thin steel sheets by laser-arc hybrid welding - Laser focused arc welding
Ono, M
Shinbo, Y
Yoshitake, A
Ohmura, M
[J]. FIRST INTERNATIONAL SYMPOSIUM ON HIGH-POWER LASER MACROPROCESSING, 2003, 4831 : 369 - 374
[7] Correction to: Application of laser-arc hybrid welding of steel for low-temperature service
Ivan Bunaziv
Odd M. Akselsen
Jan Frostevarg
Alexander F. H. Kaplan
[J]. The International Journal of Advanced Manufacturing Technology, 2019, 102 : 2615 - 2615
[8] Comparison of CMT with other arc modes for laser-arc hybrid welding of steel
Frostevarg, Jan
Kaplan, Alexander F. H.
Lamas, Javier
[J]. WELDING IN THE WORLD, 2014, 58 (05) : 649 - 660
[9] Comparison of CMT with other arc modes for laser-arc hybrid welding of steel
Jan Frostevarg
Alexander F. H. Kaplan
Javier Lamas
[J]. Welding in the World, 2014, 58 : 649 - 660
[10] Development of laser-arc hybrid welding
Ono, Moriaki
Shinbo, Yukio
Yoshitake, Akihide
Ohmura, Masanori
[J]. NKK Technical Review, 2002, (86): : 8 - 12

← 1 2 3 4 5 →