Crevice Corrosion Behavior of Alloy 690 in High-Temperature Aerated Chloride Solution

Crevice corrosion behavior of Alloy 690 in high-temperature aerated chloride solution was studied using a self-designed crevice device. The SEM, EDS, XRD, and XPS analyses results indicated that the oxide films outside the crevice consisted of Ni-Cr oxides containing a small amount of hydroxides, and the oxide films on crevice mouth consisted of a (Ni,Fe)(Fe,Cr)(2)O-4 spinel oxides outer layer and a Cr(OH)(3) inner layer, and the oxide films inside the crevice consisted of a alpha-CrOOH outer layer and a Cr(OH)(3) inner layer. When crevice corrosion occurred, the hydrolysis of Cr3+ led to the formation of Cr(OH)(3) inside the crevice, and caused the pH value of crevice solution to decrease, and Cl- migrated from outside the crevice into inside the crevice due to electrical neutrality principle and accumulation. When the water chemistry inside the crevice reached the critical value of active dissolution of metal, the active dissolution of metal inside the crevice occurred. In addition, (Ni,Fe)(Fe,Cr)(2)O-4 spinel oxides on the crevice mouth were formed by the deposition of metal ions migrated from inside the crevice. The mechanism of crevice corrosion and the formation mechanism of oxide films at different regions were also discussed.