Boiling heat transfer in rectangular microchannels with reentrant cavities

被引：204
|
作者：
Kosar, A [1 ]
Kuo, CJ [1 ]
Peles, Y [1 ]
机构：
[1] Rensselaer Polytech Inst, Dept Mech Aerosp & Nucl Engn, Troy, NY 12180 USA
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2005年 / 48卷 / 23-24期
基金：
美国国家科学基金会;
关键词：
microchannels; boiling; reentrant cavity; enhanced;
D O I：
10.1016/j.ijheatmasstransfer.2005.06.003
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
This paper investigates flow boiling of water in microchannels with a hydraulic diameter of 227 mu m possessing 7.5 mu m wide reentrant cavities on the sidewalls. Average two-phase heat transfer coefficients and CHF conditions have been obtained over a range of effective heat fluxes (28-445 W/cm(2)) and mass velocities (41-302 kg/m(2) s). High Boiling number and Reynolds number have been found to promote convective boiling, while Nucleate Boiling dominated at low Reynolds number and Boiling number. A criterion for the transition between nucleate and convective boiling has been provided. Existing correlations did not provide satisfactory agreement with the heat transfer coefficient but did predict CHF conditions well. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：4867 / 4886
页数：20
相关论文
共 50 条
  • [1] boiling heat transfer in rectangular microchannels with reentrant cavities
    Awad, M. M.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 62 : 541 - 542
  • [2] Reduced pressure boiling heat transfer in rectangular microchannels with interconnected reentrant cavities
    Kosar, A
    Kuo, CJ
    Peles, Y
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2005, 127 (10): : 1106 - 1114
  • [3] Local heat transfer coefficient of flow boiling in microchannels with artificial reentrant cavities
    Kuo, Chih-Jung
    Peles, Yoav
    PROCEEDINGS OF THE ASME/JSME THERMAL ENGINEERING SUMMER HEAT TRANSFER CONFERENCE 2007, VOL 1, 2007, : 119 - 125
  • [4] Pool boiling heat transfer of porous structures with reentrant cavities
    Deng, Daxiang
    Feng, Junyuan
    Huang, Qingsong
    Tang, Yong
    Lian, Yunsong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 99 : 556 - 568
  • [5] Experimental investigations into flow boiling heat transfer in ribbed micro-channels with rectangular reentrant cavities
    Yan, Xin
    Wu, Yue
    Zhang, Zitao
    He, Kun
    Applied Thermal Engineering, 2025, 261
  • [6] Effect of Nucleation Cavities on Enhanced Boiling Heat Transfer in Microchannels
    Sitar, Anze
    Golobic, Iztok
    NANOSCALE AND MICROSCALE THERMOPHYSICAL ENGINEERING, 2016, 20 (01) : 33 - 50
  • [7] Flow boiling instabilities in microchannels and means for mitigation by reentrant cavities
    Kuo, C. -J.
    Peles, Y.
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2008, 130 (07):
  • [8] Boiling heat transfer of binary and ternary mixtures in multiple rectangular microchannels
    Jige, Daisuke
    Nobunaga, Maika
    Nogami, Taiga
    Inoue, Norihiro
    APPLIED THERMAL ENGINEERING, 2023, 229
  • [9] Suppression of flow boiling instabilities in microchannels using artificial reentrant cavities
    Kuo, Chih-Jung
    Peles, Yoav
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 8, PTS A AND B: HEAT TRANSFER, FLUID FLOWS, AND THERMAL SYSTEMS, 2008, : 1063 - 1068
  • [10] Heat transfer in rectangular microchannels
    Tunc, G
    Bayazitoglu, Y
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (04) : 765 - 773
12345