Driving Performance of Natural Fiber Gears Made Only from Bamboo Fibers Extracted with a Machining Center

被引：0

作者：

Kawabata, Tetsuya ^{[1
]}

Hirogaki, Toshiki ^{[1
]}

Aoyama, Eiichi ^{[1
]}

Nobe, Hiromichi ^{[2
]}

机构：

[1] Doshisha Univ, Grad Sch Sci & Engn, 1-3 Tataramiyakodani, Kyotanabe, Kyoto 6100394, Japan

[2] Mifuji Kikai Inc, Tatebayashi, Japan

来源：

INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY | 2020年 / 14卷 / 02期

关键词：

bamboo fiber; gear; tooth meshing; tooth root strain; acceleration; PLASTIC GEARS; COMPOSITES; RESIN;

D O I：

10.20965/ijat.2020.p0280

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Plastic gears are light and can be used without any lubricant, but they have low strength and an adverse effect on the environment. Therefore, a new gear that maintains these advantages while mitigating the disadvantages has been proposed. The development of sustainable and reproducible natural materials is desired to address these environmental problems. Therefore, in this study, a method was devised to extract high-quality and precise bamboo fibers using a machining center. Then, the hot press method was used to produce a novel spur gear made from only bamboo fibers, which is a green and organic machine element with a complicated shape. The present paper describes the characteristics of the proposed bamboo fiber gears, considering experimental results, including the hot press molding conditions, and the influence of fiber length on tooth bending strength, root strain, and vibration due to meshing teeth.

引用

页码：280 / 293

页数：14

共 16 条

[1] DRIVING PERFORMANCE OF NATURAL FIBER GEARS MADE FROM ONLY BAMBOO FIBERS EXTRACTED WITH A MACHINING CENTER
Yanagawa, Takayuki
Hirogaki, Toshiki
Aoyama, Eiichi
Matsui, Syota
Nobe, Hiromichi
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2018, VOL 8, 2018,
[2] Hot press fabrication of hemisphere shell product made of bamboo fibers extracted with a machining center
Department of Mechanical Engineering, Doshisha University, 1-3 Tataramiyakodani, Kyotanabe, Kyoto
610-0321, Japan
不详
520-2194, Japan
不详
374-0052, Japan
[J]. J. Adv. Mech. Des. Syst. Manuf., 3
[3] SUSTAINABLE MANUFACTURING SYSTEM FOCUSING ON THE NATURAL GROWTH OF BAMBOO: LIFE CYCLE ASSESSMENT OF BINDER-FREE COMPOSITES MADE FROM BAMBOO FIBERS EXTRACTED WITH A MACHINING CENTER
Ogawa, Keiji
Hirogaki, Toshiki
Aoyama, Eiichi
Takagi, Yota
Ogawa, Sachiko
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2011, VOL 9, 2012, : 911 - 917
[4] SELECTION METHOD OF MOLDING CONDITION FOR SELF-ADHESIVE PRODUCTS USING ONLY BAMBOO FIBERS AND POWDER EXTRACTED BY A MACHINING CENTER
Tanaka, Kaito
Kitazaki, Reo
Hirogaki, Toshiki
Aoyama, Eiichi
Nobe, Hiromichi
[J]. PROCEEDINGS OF ASME 2023 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2023, VOL 5, 2023,
[5] DEVELOPMENT OF SELF-ADHESIVE BAMBOO FIBER COMPOSITE WITH THREE-DIMENSIONAL SHAPE USING FIBERS EXTRACTED WITH MACHINING CENTER
Ogawa, Sachiko
Ogawa, Keiji
Hirogaki, Toshiki
Aoyama, Eiichi
Taniguchi, Mitsuaki
Nobe, Hiromichi
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2010, VOL 1, 2011, : 53 - 59
[6] Fabrication of Binder-free Green Composite Using Bamboo Fibers Extracted with a Machining Center
Ogawa, Keiji
Hirogaki, Toshiki
Aoyama, Eiichi
Taniguchi, Mitsuaki
Ogawa, Sachiko
[J]. ADVANCED PRECISION ENGINEERING, 2010, 447-448 : 760 - +
[7] SELECTION METHOD OF MOLDING CONDITION FOR SELF-ADHESIVE PRODUCTS USING ONLY BAMBOO FIBERS EXTRACTED WITH A MACHINING CENTER BASED ON BAYESIAN OPTIMIZATION
Tauchi, Daigo
Hirogaki, Toshiki
Aoyama, Eiichi
Ogawa, Keiji
Nobe, Hiromichi
[J]. PROCEEDINGS OF ASME 2021 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2021, VOL 5, 2021,
[8] Enhancing the Performance of Asphalt Mastic with Natural Fiber Reinforcement: Basalt and Bamboo Fibers
Xie, Tingting
Ren, Wenjuan
Chen, Yifang
Sheng, Jiajia
Wang, Linbing
[J]. APPLIED SCIENCES-BASEL, 2023, 13 (13):
[9] FABRICATION OF COMPLEX-SHAPE PRODUCTS FROM A BINDER-FREE GREEN COMPOSITE USING BAMBOO FIBERS AND POWDERS EXTRACTED WITH A MACHINING CENTER
Inoue, Kota
Bigeard, Antoine
Hirogaki, Toshiki
Aoyama, Eiichi
Ogawa, Keiji
Nobe, Hiromichi
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2017, VOL 4, 2017,
[10] Fiber Reinforced Concrete with Natural Plant Fibers-Investigations on the Application of Bamboo Fibers in Ultra-High Performance Concrete
Bittner, Can Mark
Oettel, Vincent
[J]. SUSTAINABILITY, 2022, 14 (19)

← 1 2 →