Properties of banana and pandanus woven fabric reinforced unsaturated polyester composites

被引:62
|
作者
Mariatti, M. [1 ]
Jannah, M. [1 ]
Abu Bakar, A. [1 ]
Khalil, H. P. S. Abdul [2 ]
机构
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Nibong Tebal 14300, Penang, Malaysia
[2] Univ Sains Malaysia, Sch Ind Technol, George Town 11800, Malaysia
关键词
woven; banana fiber; pandanus fiber; polyester; vacuum bagging technique;
D O I
10.1177/0021998308090452
中图分类号
TB33 [复合材料];
学科分类号
摘要
The properties of unsaturated polyester reinforced with banana and pandanus woven fabric were studied. Both of the composite systems were fabricated by vacuum bagging technique. Flexural, impact, and water absorption properties were investigated as a function of total fiber volume fraction. It is observed that the flexural and impact properties of both natural fiber composites are higher than pure polyester. Banana woven composites exhibit higher flexural and impact properties due to the difference structure in cross section, and higher cellulose content compared to that of pandanus woven composites. In both woven systems, the flexural modulus and strength increased with increase in fiber volume fraction. However above 10 and 15 vol. fraction of fibers, the flexural and impact properties of these two woven composite systems decreased due to insufficient resin, respectively. Water absorption test showed that woven pandanus fabric composites increased the overall water uptake than woven banana fabric composites, this might be due to higher hemicellulose content and the defects existed in the composite system.
引用
收藏
页码:931 / 941
页数:11
相关论文
共 50 条
  • [1] Effect of Chemical Surface Modifications on the Properties of Woven Banana-Reinforced Unsaturated Polyester Composites
    Jannah, M.
    Mariatti, M.
    Bakar, A. Abu
    Khalil, H. P. S. Abdul
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2009, 28 (12) : 1519 - 1532
  • [2] Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation
    Alavudeen, A.
    Rajini, N.
    Karthikeyan, S.
    Thiruchitrambalam, M.
    Venkateshwaren, N.
    [J]. MATERIALS & DESIGN, 2015, 66 : 246 - 257
  • [3] The Properties of Woven Kenaf and Betel Palm (Areca catechu) Reinforced Unsaturated Polyester Composites
    Lai, W. L.
    Mariatti, M.
    Mohamad, Jani S.
    [J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2008, 47 (12) : 1193 - 1199
  • [4] The static and dynamic mechanical properties of banana and glass fiber woven fabric-reinforced polyester composite
    Pothan, LA
    Potschke, P
    Habler, R
    Thomas, S
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2005, 39 (11) : 1007 - 1025
  • [5] Study on mechanical properties of alkali treated plain woven banana fabric reinforced biodegradable composites
    Gunge, Amaresh
    Koppad, Praveennath G.
    Nagamadhu, M.
    Kivade, S. B.
    Murthy, K. V. Shivananda
    [J]. COMPOSITES COMMUNICATIONS, 2019, 13 : 47 - 51
  • [6] Experimental characterization of woven jute-fabric-reinforced isothalic polyester composites
    Ahmed, K. Sabeel
    Vijayarangan, S.
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 104 (04) : 2650 - 2662
  • [7] Mechanical properties of hybrid woven roving and chopped strand mat glass fabric reinforced polyester composites
    Rashid, Bushra
    Sadeq, Amal
    Ebraheem, Muameer
    Mohammed, Aymen R.
    [J]. MATERIALS RESEARCH EXPRESS, 2019, 6 (10):
  • [8] Mechanical properties of woven banana fibre reinforced epoxy composites
    Sapuan, SM
    Leenie, A
    Harimi, M
    Beng, YK
    [J]. MATERIALS & DESIGN, 2006, 27 (08): : 689 - 693
  • [9] Fabrication and Characterization of Banana Fiber Reinforced Unsaturated Polyester Resin Based Composites
    Hossain, Md Sahadat
    Bin Mobarak, Mashrafi
    Rony, Farzana Khan
    Sultana, Sazia
    Mahmud, Monika
    Ahmed, Samina
    [J]. NANO HYBRIDS AND COMPOSITES, 2020, 29 : 84 - 92
  • [10] Viscoelastic properties of kenaf reinforced unsaturated polyester composites
    Osman, Ekhlas A.
    Mutasher, Saad A.
    [J]. INTERNATIONAL JOURNAL OF COMPUTATIONAL MATERIALS SCIENCE AND ENGINEERING, 2014, 3 (01)