Fe-doped 8YSZ at different composition for solid electrolyte in solid oxide fuel cell

被引:2
|
作者
Johar, B. [1 ]
Zaili, N. A. [1 ]
机构
[1] Univ Malaysia Perlis, Sch Mat Engn, Kangar 02600, Perlis, Malaysia
关键词
YTTRIA-STABILIZED ZIRCONIA; CONDUCTIVITY; YSZ;
D O I
10.1051/matecconf/20167801102
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Pure 8 mol% yttria stabilized zirconia (YSZ) and Fe-doped (1 mol%, 2 mol% and 3 mol%) YSZ electrolyte were prepared and sintered at 1550 degrees C. Transition metal oxide is added into YSZ as sintering aided has a function to reduce the sintering temperature. The microstructure, crystal structure and ionic conductivity of pure YSZ and Fe-doped YSZ at different composition were investigated. The amount of cubic phase decreased as the amount of Fe increased. Fe-doped 8YSZ had higher conductivity than pure 8YSZ. The ionic conductivity of 3FeYSZ is 9.35x10(-8) S/cm higher than 1FeYSZ which is 4.72x10(-9) S/cm when operated at 300 degrees C.
引用
收藏
页数:7
相关论文
共 50 条
  • [1] Revisiting Fe-doped 8YSZ as the electrolyte of SOFC - From sintering to electrochemical performance
    Alizadeh, Siavash M.
    Mohebbi, Hamed
    Golmohammad, Mohammad
    Sharifi, Omid
    Farzaneh, Farshid
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 938
  • [2] Revisiting Fe-doped 8YSZ as the electrolyte of SOFC – From sintering to electrochemical performance
    Alizadeh, Siavash M.
    Mohebbi, Hamed
    Golmohammad, Mohammad
    Sharifi, Omid
    Farzaneh, Farshid
    [J]. Journal of Alloys and Compounds, 2023, 938
  • [3] Low temperature sintering of 8YSZ electrolyte film for intermediate temperature solid oxide fuel cells
    Zhu, QS
    Fan, B
    [J]. SOLID STATE IONICS, 2005, 176 (9-10) : 889 - 894
  • [4] Materials synthesis and characterization of 8YSZ nanomaterials for the fabrication of electrolyte membranes in solid oxide fuel cells
    Menzler, NH
    Lavergnat, D
    Tietz, F
    Sominski, E
    Djurado, E
    Fischer, W
    Pang, GS
    Gedanken, A
    Buchkremer, HP
    [J]. CERAMICS INTERNATIONAL, 2003, 29 (06) : 619 - 628
  • [5] Fe-Doped SDC Solid Solution as an Electrolyte for Low-to-Intermediate-Temperature Solid Oxide Fuel Cells
    Zhang, Lijie
    Jiang, Yunan
    Zhu, Kang
    Shi, Nai
    Chen, Zhengguo
    Peng, Ranran
    Xia, Changrong
    [J]. ACS APPLIED MATERIALS & INTERFACES, 2024, 16 (04) : 4648 - 4660
  • [6] Electrochemistry of Reformate Fueled Ni/8YSZ Anodes for Solid Oxide Fuel Cells
    Kromp, A.
    Weber, A.
    Ivers-Tiffee, E.
    [J]. SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 3063 - 3075
  • [7] Cold Sintering of Anode-Supported 8YSZ/NiO-8YSZ Bilayers for Solid Oxide Fuel Cells
    Ucun, Tugce
    Murutoglu, Murat
    Ulasan, Ozge
    Demirkal, Emrah
    Buyukaksoy, Aligul
    Tur, Yahya Kemal
    Yilmaz, Huseyin
    [J]. ACS APPLIED ENERGY MATERIALS, 2021, 4 (12): : 13748 - 13758
  • [8] Physical methods of YSZ film application on solid oxide fuel cell electrolyte
    Opakhay, S.
    [J]. RECENT CONTRIBUTIONS TO PHYSICS, 2020, 72 (01): : 73 - 80
  • [9] Effect of LSGM Addition on Electrical Characteristics of 8YSZ Ceramics for Solid Electrolyte
    Syarif, Dani Gustaman
    Soepriyanto, Syoni
    Ismunandar
    Korda, Akhmad A.
    [J]. JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2013, 49 (02) : 52 - 59
  • [10] Influence of Composition of Gd-Doped Ceria Electrolyte on Performance of Solid Oxide Fuel Cell
    Ibusuki, Yuta
    Hirata, Yoshihiro
    Sameshimac, Soichiro
    Matsunaga, Naoki
    [J]. ECO-MATERIALS PROCESSING AND DESIGN XIII, 2012, 724 : 389 - 392