Ni3Al/diamond composites produced by pulse plasma sintering (PPS) with the participation of the SHS reaction

被引：7

作者：

Michalski, Andrzej ^{[1
]}

Cymerman, Konrad ^{[1
]}

机构：

[1] Warsaw Univ Technol, Fac Mat Sci & Engn, PL-02507 Warsaw, Poland

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2015年 / 636卷

关键词：

Composite; Intermetallics; Nickel aluminides; Diamond; Pulse plasma sintering; MATRIX;

D O I：

10.1016/j.jallcom.2015.02.174

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Dense Ni3Al and Ni3Al/diamond sinters were produced by sintering nickel, aluminum, and diamond powders using the PPS method with the participation of the self-propagating high-temperature synthesis (SHS). The sintering process was conducted at a temperature of 1000 degrees C for 5 min. The density of the sinters was 98.3% in Ni3Al and 100% in Ni3Al/diamond, and the hardness was 305 HV and 650 HV, respectively. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：196 / 201

页数：6

共 50 条

[1] NiAl-Al2O3 composites produced by pulse plasma sintering with the participation of the SHS reaction
Michalski, A
Jaroszewicz, J
Rosinski, M
Siemiaszko, D
[J]. INTERMETALLICS, 2006, 14 (06) : 603 - 606
[2] Synthesis and characterization of the diamond/copper composites produced by the pulse plasma sintering (PPS) method
Rosinski, M.
Ciupinski, L.
Grzonka, J.
Michalski, A.
Kurzydlowski, K. J.
[J]. DIAMOND AND RELATED MATERIALS, 2012, 27-28 : 29 - 35
[3] W/Cu composites produced by pulse plasma sintering technique (PPS)
Rosinski, M.
Fortuna, E.
Michalski, A.
Pakiela, Z.
Kurzydlowski, K. J.
[J]. FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 2621 - 2626
[4] Cu/DIAMOND COMPOSITES PRODUCED BY PULSE PLASMA SINTERING TECHNIQUE
Rosinski, Marcin
Michalski, Andrzej
[J]. COMPOSITES THEORY AND PRACTICE, 2009, 9 (03): : 260 - 264
[5] JOINING OF Ni3Al MICROCRYSTALLINE FOILS BY SHS REACTION
Durejko, T.
Jozwik, P.
Bojar, Z.
[J]. ARCHIVES OF METALLURGY AND MATERIALS, 2009, 54 (04) : 1103 - 1109
[6] REACTION SINTERING OF NI3AL TO NEAR FULL DENSITY
NISHIMURA, C
LIU, CT
[J]. SCRIPTA METALLURGICA ET MATERIALIA, 1992, 26 (03): : 381 - 385
[7] Study of phase decomposition during spark plasma sintering of Al-5% Ni3Al composites
De Leon-Murguia, Norma, V
Lopez-Hirata, Victor M.
Ferreira-Palma, Carlos
Rivas-Lopez, Diego, I
Hernandez-Santiago, Felipe
Dorantes-Rosales, Hector J.
[J]. REVISTA DE METALURGIA, 2019, 55 (02)
[8] Intermetallide Ni3Al SHS under pressure
Ovcharenko, V.E.
Lapshin, O.V.
[J]. Fizika Goreniya i Vzryva, 2002, 38 (06): : 71 - 75
[9] Fabrication of oxide-reinforced Ni3Al composites by mechanical alloying and spark plasma sintering
Meng, Jie
Jia, Chengchang
He, Qing
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 434 (1-2): : 246 - 249
[10] Evaluation of corrosion resistance of Ni3Al produced by spark plasma sintering of mechanically activated powder mixtures
Shevtsova, L. I.
Lozhkina, E. A.
Samoylenko, V. V.
Ivanchik, I. S.
Mali, V. I.
Anisimov, A. G.
[J]. MATERIALS TODAY-PROCEEDINGS, 2019, 12 : 116 - 119

← 1 2 3 4 5 →