Selective laser melting technology: from the single laser melted track stability to 3D parts of complex shape

被引：249
|
作者：
Yadroitsev, I. [1 ]
Smurov, I. [1 ]
机构：
[1] ENISE, DIPI Lab, F-42023 St Etienne 2, France
来源：
LASER ASSISTED NET SHAPE ENGINEERING 6, PROCEEDINGS OF THE LANE 2010, PART 2 | 2010年 / 5卷
关键词：
Rapid manufacturing; Selective laser melting; Metal powders; MIXED POWDER BED; METAL POWDERS; PARAMETERS; DEPOSITION; MODEL;
D O I：
10.1016/j.phpro.2010.08.083
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
To up-grade SLM process for manufacturing real components, high mechanical properties of final product must be achieved. The properties of a part produced by SLM technology depend strongly on the properties of each single track and each single layer. In this study, effects of the processing parameters such as laser power, scanning speed and powder layer thickness on the single tracks formation are analyzed. It is shown that, by choosing an optimal technological window and appropriate strategy of SLM, it is possible to manufacture highly complex parts with mechanical properties comparable to those of wrought material. (C) 2010 Published by Elsevier B.V.
引用
收藏
页码：551 / 560
页数：10
相关论文
共 50 条
  • [1] Strategy of fabrication of complex shape parts based on the stability of single laser melted track
    Yadroitsev, I.
    Yadroitsava, I.
    Smurov, I.
    LASER-BASED MICRO- AND NANOPACKAGING AND ASSEMBLY V, 2011, 7921
  • [2] Shape distortion prediction in complex 3D parts induced during the selective laser melting process
    Bompos, Dimitrios
    Chaves-Jacob, Julien
    Sprauel, Jean-Michel
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2020, 69 (01) : 517 - 520
  • [3] 3D laser shock peening - A new method for improving fatigue properties of selective laser melted parts
    Kalentics, Nikola
    de Seijas, Manuel Ortega Varela
    Griffiths, Seth
    Leinenbach, Christian
    Loge, Roland E.
    ADDITIVE MANUFACTURING, 2020, 33
  • [4] Single track and single layer melting of silica by Selective Laser Melting
    Yap, C. Y.
    Chua, C. K.
    Dong, Z.
    Liu, Z. H.
    Zhang, D. Q.
    HIGH VALUE MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2014, : 261 - 265
  • [5] Smart Monitoring Program for Selective Laser Melting 3D Printing Technology
    Agron, Danielle Jaye S.
    Kim, Dong-Seong
    Lee, Jae-Min
    Almendrala, Michelle
    2023 IEEE 17TH INTERNATIONAL CONFERENCE ON SEMANTIC COMPUTING, ICSC, 2023, : 337 - 340
  • [6] Selective laser melting of alumina: A single track study
    Fan, Zhiqi
    Lu, Mingyuan
    Huang, Han
    CERAMICS INTERNATIONAL, 2018, 44 (08) : 9484 - 9493
  • [7] Packaging for Power Semiconductors Based on the 3D Printing Technology Selective Laser Melting
    Conrad, Marcus
    De Doncker, Rik W.
    Schniedenharn, Maximilian
    Diatlov, Andrei
    2014 16TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE'14-ECCE EUROPE), 2014,
  • [8] Healing cracks in selective laser melting by 3D laser shock peening
    Kalentics, Nikola
    Sohrabi, Navid
    Tabasi, Hossein Ghasemi
    Griffiths, Seth
    Jhabvala, Jamasp
    Leinenbach, Christian
    Burn, Andreas
    Loge, Roland E.
    ADDITIVE MANUFACTURING, 2019, 30
  • [9] 3D Residual Stresses in Selective Laser Melted Hastelloy X
    Saarimaki, Jonas
    Lundberg, Mattias
    Moverare, Johan J.
    Brodin, Hakan
    RESIDUAL STRESSES 2016: ICRS-10, 2017, 2 : 73 - 78
  • [10] Study on Fiber Laser Single Melting Track During Selective Laser Forming
    Jinhui, L.
    Ruidi, L.
    Zhao, C.
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 4020 - +
12345