On the notch fatigue strength of additively manufactured polylactide (PLA)

被引：39
|
作者：
Ezeh, O. H. [1 ]
Susmel, L. [1 ]
机构：
[1] Univ Sheffield, Dept Civil & Struct Engn, Mappin St, Sheffield S1 3JD, S Yorkshire, England
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2020年 / 136卷
关键词：
Additive manufacturing; PLA; Notch; Fatigue; Critical distance; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; CRITICAL DISTANCES; COMPONENTS;
D O I：
10.1016/j.ijfatigue.2020.105583
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The strength and cracking behaviour under fatigue loading of additively manufactured polylactide (PLA) was investigated experimentally to quantify and model the role of notches. These tests were run under load ratios equal to -1 and to 0. Being supported by the experimental evidence, 3D-printed PLA was treated as a linear-elastic, isotropic, and homogenous material. This allowed the use of the Theory of Critical Distances to be extended also to the fatigue assessment of notched 3D-printed PLA. This theory was seen to return accurate estimates. This confirms that it can be used also to estimate fatigue lifetime of notched 3D-printed polymers.
引用
收藏
页数：12
相关论文
共 50 条
12345