Dynamic asymmetrical instability of elastic-plastic beams

被引:12
|
作者
Ma, GW [1 ]
Liu, YM
Zhao, J
Li, QM
机构
[1] Nanyang Technol Univ, Sch Civil & Environm Engn, Singapore 639798, Singapore
[2] Univ Manchester, Sch Mech Aerosp & Civil Engn, Manchester M60 1QD, Lancs, England
关键词
dynamic instability; asymmetrical response; elastic-plastic beam; impulsive load; geometrical misalignment; material property mismatch; unsymmetry of applied loads; disturbance of boundary conditions;
D O I
10.1016/j.ijmecsci.2004.12.005
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Dynamic instability of elastic-plastic beam is investigated by employing a three-degree-of-freedom (3-DoF) beam model. Especially, asymmetrical instability induced by symmetrical load is discussed. The asymmetrical instability is considered as a second-order buckling mode. Four types of perturbations, i.e., geometrical misalignment, material property mismatch, unsymmetry of applied load and disturbance of boundary conditions, are introduced to activate the asymmetrical responses. The asymmetrical response is characterized by a modal participation factor 92 which corresponds to an asymmetrical mode shape. Phase plane trajectories and Poincare map are used to illustrate the chaotic characteristics of the beam response. Results show that if the perturbations are small enough, the perturbation type has negligible influence on the critical load for the occurrence of the asymmetrical instability, which implies that the asymmetrical instability is an intrinsic feature of the beam system. However, with the increase of the magnitude of the perturbations, the influence of the asymmetrical vibration is expanded to a large extension of loading parameter. (C) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:43 / 62
页数:20
相关论文
共 50 条