Conditions for the formation of cubic boron nitride films by rf magnetron sputtering

被引:34
|
作者
Ye, J [1 ]
Rothhaar, U
Oechsner, H
机构
[1] Univ Kaiserslautern, Dept Phys, D-67563 Kaiserslautern, Germany
[2] Univ Kaiserslautern, Ctr Mat Res, D-67563 Kaiserslautern, Germany
来源
SURFACE & COATINGS TECHNOLOGY | 1998年 / 105卷 / 1-2期
关键词
boron nitride films; rf magnetron sputtering; Si(100) substrates;
D O I
10.1016/S0257-8972(98)00479-4
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Boron nitride films were prepared on Si (100) substrates by r.f. magnetron sputtering from an hBN target with pure argon as working gas. During the deposition, the growing film was ion-bombarded via an r.f. bias at the substrate without additional heating. The deposited films were characterized by Fourier transform infra-red spectroscopy. It was found that the cubic BN phase was formed only within a narrow window of the substrate bias voltage, and after the substrate was heated up to about 300 degrees C by the ion bombardment. With carefully controlled deposition parameters, a cBN fraction above 90% was achieved. With increasing argon pressure, the cBN forming window of the substrate bias voltage was found to be shifted to higher voltages, whereas the width of this window became broader. The energy distribution of bombarding ions at the substrate has been measured and is discussed with regard to the cBN-forming energy window. (C) 1998 Elsevier Science S.A.
引用
收藏
页码:159 / 164
页数:6
相关论文
共 50 条
  • [1] Cubic boron nitride thin films by tuned rf magnetron sputtering
    Gimeno, S
    Andujar, JL
    Lousa, A
    [J]. DIAMOND AND RELATED MATERIALS, 1997, 6 (5-7) : 604 - 607
  • [2] Conditions for the formation of cubic boron nitride films by r.f. magnetron sputtering
    Ye, J.
    Rothhaar, U.
    Oechsner, H.
    [J]. Surface and Coatings Technology, 1998, 105 (1-2): : 159 - 164
  • [3] Formation of cubic boron nitride films by r.f. magnetron sputtering
    Jiang, LD
    Fitzgerald, AG
    Rose, MJ
    Lousa, A
    Gimeno, S
    [J]. SURFACE AND INTERFACE ANALYSIS, 2002, 34 (01) : 732 - 734
  • [4] Preparation of cubic boron nitride films by RF sputtering
    Mieno, Masahiro
    Yoshida, Toyonobu
    [J]. Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 1990, 29 (07): : 1175 - 1177
  • [5] Cubic boron nitride films by dc and rf magnetron sputtering: Layer characterization and process diagnostics
    Hahn, J
    Friedrich, M
    Pintaske, R
    Schaller, M
    Kahl, N
    Zahn, DRT
    Richter, F
    [J]. DIAMOND AND RELATED MATERIALS, 1996, 5 (10) : 1103 - 1112
  • [6] Deposition time influence on cubic boron nitride thin films by tuned rf magnetron sputtering
    Gimeno, S
    Munoz, JC
    Lousa, A
    [J]. THIN SOLID FILMS, 1998, 317 (1-2) : 376 - 379
  • [7] Cubic boron nitride films deposited by unbalanced RF magnetron sputtering and pulsed DC substrate bias
    Ding, XZ
    Zeng, XT
    Xie, H
    [J]. THIN SOLID FILMS, 2003, 429 (1-2) : 22 - 27
  • [8] PREPARATION OF CUBIC BORON-NITRIDE FILMS BY RF-SPUTTERING
    MIENO, M
    YOSHIDA, T
    [J]. JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 1990, 29 (07): : L1175 - L1177
  • [9] Growth of boron nitride thin films by tuned substrate RF magnetron sputtering
    Gimeno, S
    Andujar, JL
    Bertran, E
    Lousa, A
    [J]. DIAMOND AND RELATED MATERIALS, 1996, 5 (3-5) : 535 - 538
  • [10] Characterization of ternary boron carbon nitride films synthesized by RF magnetron sputtering
    Kim, DH
    Byon, E
    Lee, S
    Kim, JK
    Ruh, H
    [J]. THIN SOLID FILMS, 2004, 447 : 192 - 196