Nickel oxide films by thermal annealing of ion-beam-sputtered Ni: Structure and electro-optical properties

被引:5
|
作者
Horak, P. [1 ]
Remes, Z. [2 ]
Bejsovec, V. [1 ]
Vacik, J. [1 ]
Danis, S. [3 ]
Kormunda, M. [4 ]
机构
[1] Acad Sci Czech Republ, Nucl Phys Inst, CZ-25068 Rez, Czech Republic
[2] Acad Sci Czech Republ, Inst Phys, Cukrovarnicka 10-112, CR-16200 Prague, Czech Republic
[3] Charles Univ Prague, Fac Math & Phys, Dept Condensed Matter Phys, Ke Karlovu 5, CR-12116 Prague, Czech Republic
[4] Jan Evangelista Purkyne Univ Usti Nad Labem, Dept Phys, Ceske Mladeze 8, Usti Nad Labem 40096, Czech Republic
关键词
NiO; Ion beam sputtering; Thermal annealing; Nuclear analytical methods; Optical properties; PHOTOTHERMAL DEFLECTION SPECTROSCOPY; THIN-FILMS; OPTICAL-PROPERTIES; ELECTRICAL-PROPERTIES; SPRAY-PYROLYSIS; GAS-DETECTION; DEPOSITION; SPECTRA; METAL; HFO2;
D O I
10.1016/j.tsf.2017.08.047
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Nickel oxide films were prepared by thermal annealing of Ni deposited by ion beam sputtering on Si (or glass) substrates. The annealing was carried out in a laboratory furnace open to air at temperatures 350 degrees C-500 degrees C with annealing time 1-7 h (1-h step). For as-deposited Ni films the sheet resistance R-S was found to be 8.39 Omega/square and no significant XRD diffraction peaks were observed. The thermal annealing resulted in significant changes in composition and electrical, structural and optical properties. The oxidation process led to a rapid growth of R-S up to 10(9)Omega/square, appearance of the optical absorption edge for oxidized Ni, and the formation of a polycrystalline NiO structure with the main NiO (111) diffraction peak. At 350 degrees C the annealing yielded 3-stage behavior of the sheet resistance due to limited oxidation during short time annealing. Longer processing times (>3 h) were necessary to successfully oxidize the deposited Ni film, after 1 h annealing the oxygen content (analyzed by nuclear resonance analysis) showed a significantly lower concentration within the depth of a sample; more uniform composition was found after prolonged annealing. XPS analysis showed the formation of a significant amount of nickel hydroxide at the surface. It was confirmed by ERDA. The optical properties were studied by Photothermal Deflection Spectroscopy (PDS). The data correlate with the 3-stage behavior of sheet resistance at 350 degrees C, suggesting lower oxidation during short-term annealing, while transparent nickel oxide films were formed during longer annealing and at higher temperatures. Based on analysis of the obtained experimental data (from measurement of the sheet resistance, XRD diffraction and optical absorption spectra), the temperature of 400 degrees C was found to be optimal for the formation of the fully oxidized NiO films. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:52 / 59
页数:8
相关论文
共 50 条
  • [1] Effect of annealing on ion-beam-sputtered hafnium oxide thin films properties
    Zhao, Mingxue
    Wang, Yanzhi
    Lu, Yesheng
    Chen, Yu
    Shao, Jianda
    Optical Materials, 2024, 157
  • [2] PROPERTIES OF ION-BEAM-SPUTTERED NI/FE ARTIFICIAL LATTICE FILM
    NAGAI, Y
    SENDA, M
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 1987, 26 (09): : L1514 - L1516
  • [3] Quantum confinement effects on the optical properties of ion beam sputtered nickel oxide thin films
    Krishna, MG
    Bhattacharya, AK
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2001, 15 (02): : 191 - 200
  • [4] PROPERTIES OF ION-BEAM-SPUTTERED NI/FE ARTIFICIAL LATTICE FILM
    NAGAI, Y
    SENDA, M
    TOSHIMA, T
    JOURNAL OF APPLIED PHYSICS, 1988, 63 (04) : 1136 - 1140
  • [5] Electro-optical characteristics of indium tin oxide (ITO) films: Effect of thermal annealing
    Morgan, DV
    Salehi, A
    Aliyu, YH
    Bunce, RW
    RENEWABLE ENERGY, 1996, 7 (02) : 205 - 208
  • [6] Comparison of the optical properties of oxide films deposited by reactive-dc-magnetron sputtering with those of ion-beam-sputtered and electron-beam-evaporated films
    Pond, Bradley J.
    Du, Tu C.
    Sobczak, J.
    Carniglia, Charles K.
    Proceedings of SPIE - The International Society for Optical Engineering, 1994, 2114 : 345 - 354
  • [7] Influence of pressure and annealing on the microstructural and electro-optical properties of RF magnetron sputtered ITO thin films
    Cruz, LR
    Legnani, C
    Matoso, IG
    Ferreira, CL
    Moutinho, HR
    MATERIALS RESEARCH BULLETIN, 2004, 39 (7-8) : 993 - 1003
  • [8] Tuning electro-optical properties of pulsed dc magnetron sputtered indium tin oxide thin films: effects of pulsing frequency and annealing
    Sivakumar, R.
    Kumar, Mohit
    Sanjeeviraja, C.
    Som, T.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2017, 28 (02) : 1409 - 1418
  • [9] ELECTRICAL AND OPTICAL-PROPERTIES OF ION-BEAM-SPUTTERED AMORPHOUS-SILICON GERMANIUM ALLOY-FILMS
    BHAN, MK
    MALHOTRA, LK
    KASHYAP, SC
    THIN SOLID FILMS, 1991, 203 (01) : 23 - 32
  • [10] Tuning electro-optical properties of pulsed dc magnetron sputtered indium tin oxide thin films: effects of pulsing frequency and annealing
    R. Sivakumar
    Mohit Kumar
    C. Sanjeeviraja
    T. Som
    Journal of Materials Science: Materials in Electronics, 2017, 28 : 1409 - 1418