Microstructural Aspects and Wear Behavior of Sinter Hardened Distaloy HP

被引：1
|
作者：
Moghaddam, K. Sheikhi [1 ]
Ghambari, M. [1 ]
Farhangi, H. [1 ]
Solimanjad, N. [2 ]
Bergmark, A. [2 ]
Khorsand, H. [3 ]
机构：
[1] Univ Tehran, Coll Engn, Sch Met & Mat Engn, Tehran, Iran
[2] Hoganas AB, SE-26383 Bruksgatan, Hoganas, Sweden
[3] KN Toosi Univ, Tehran, Iran
来源：
STEEL RESEARCH INTERNATIONAL | 2011年 / 82卷 / 11期
关键词：
cooling rates; distaloy HP; powder metallurgy; sinter hardening; wear; STEELS;
D O I：
10.1002/srin.201100109
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Effect of cooling rate during sinter hardening on the microstructure and wear behavior of sintered steel grade Distaloy HP has been studied. Wear performances are closely related to macro and micro hardness of the materials. Dry sliding wear tests have been conducted using a reciprocating pin on flat wear testing machine under normal loads of 25, 35 and 45N and at a constant speed of 0.3 m/s. The samples were sinter hardened at different cooling rates 0.5-3 degrees C/s in order to investigate the influence of microstructure and hardness on wear behavior. It has been shown that, sintering process and cooling rate change the microstructure and hence the hardness and wear behavior of the material. The best wear resistance was detected at a cooling rate of 3 degrees C/s. At this cooling rate the material had an almost martensitic microstructure and the wear rate was some how independent of the applied load.
引用
收藏
页码：1297 / 1303
页数：7
相关论文
共 50 条
  • [1] Dry-Sliding Wear of sinter hardened Steels
    Klammer, E.
    Dlapka, M.
    Gierl-Mayer, C.
    Danninger, H.
    HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2013, 68 (03): : 142 - 149
  • [2] MICROSTRUCTURAL ASPECTS OF THE FRACTURE OF HARDENED CEMENT PASTE
    STRUBLE, LJ
    STUTZMAN, PE
    FULLER, ER
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1989, 72 (12) : 2295 - 2299
  • [3] Microstructural aspects of the fracture of hardened cement paste
    Struble, Leslie J., 1600, (72):
  • [4] Microstructural aspects of the fracture of hardened cement paste
    Struble, L.J., 1600, Pharmacotherapy Publications Inc. (72):
  • [5] MICROMECHANICS OF MICROSTRUCTURAL ASPECTS OF CERAMIC WEAR
    RICE, RW
    AMERICAN CERAMIC SOCIETY BULLETIN, 1984, 63 (12): : 1473 - 1473
  • [6] Effect of compaction pressure and tempering on densification, microstructural evolution, mechanical properties, wear and machinability response of sinter hardened Ancorsteel 4300-0.6Gr
    Hadas, S.
    Annamalai, A. Raja
    Upadhyaya, A.
    MATERIALS TECHNOLOGY, 2011, 26 (05) : 263 - 270
  • [7] Microstructural aspects of wear in soft tribological alloys
    Schouwenaars, R.
    Jacobo, V. H.
    Ortiz, A.
    WEAR, 2007, 263 : 727 - 735
  • [8] An experimental investigation on wear aspects of tapping operation on hardened steels
    Coelho, Reginaldo Teixeira
    Arai, Ricardo
    Watanuki, Hugo Martinelli
    Borges, Emanuel
    MACHINING SCIENCE AND TECHNOLOGY, 2006, 10 (02) : 235 - 250
  • [9] FATIGUE BEHAVIOR AND WEAR RESISTANCE OF SINTER-HARDENING STEELS
    Dlapka, Magdalena
    Danninger, Herbert
    Gierl, Christian
    Klammer, Edgar
    Weiss, Brigitte
    Khatibi, Golta
    Betzwar-Kotas, Agnieszka
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 2012, 48 (05): : 49 - 60
  • [10] A study on the wear behavior of hardened medium carbon steel
    Lin, YC
    Wang, SW
    Chen, TM
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 120 (1-3) : 126 - 132
12345