Effect of Si addition on the microstructures and mechanical properties of TiAl intermetallics

被引：3
|
作者：
Zhu, Jianfeng [1 ]
Yang, Wenwen [1 ]
Li, Shaodan [1 ]
机构：
[1] Shaanxi Univ Sci & Technol, Key Lab Auxiliary Chem & Technol Chem Ind, Minist Educ, Xian 710021, Peoples R China
来源：
ADVANCED MATERIALS, PTS 1-4 | 2011年 / 239-242卷
关键词：
TiAl; Ti5Si3; Composite; Microstructure; Mechanical properties;
D O I：
10.4028/www.scientific.net/AMR.239-242.413
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
TiAl/Ti5Si3 in situ composites were successfully fabricated by reactive hot-press method from powder mixtures of Ti, Al and Si. The influence of the Si addition on the microstructures and mechanical properties of TiAl/Ti5Si3 composites was investigated in detail. The results show that an appropriate amount of addition of Si refined the matrix structure obviously due to the in situ formed Ti5Si3, and as a result, the flexural strength and fracture toughness of the composites are modified. When the Si content is 1.82 wt %, the flexural strength and the fracture toughness reach the maximum value of 685.67 MPa and 9.02 MPa.m(1/2), respectively. The enhancing mechanism was also discussed.
引用
收藏
页码：413 / 416
页数：4
相关论文
共 50 条
  • [1] Effect of TiO2 addition on the microstructures and mechanical properties of γ-TiAl intermetallics
    Zhu, Jianfeng
    Yang, Wenwen
    Wang, Jiangjing
    MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 2011, 211-212 : 205 - 208
  • [2] Effect of nitrogen addition on microstructures and mechanical properties of TiAl based alloys
    Trans Nonferrous Met Soc China, 4 (692-695):
  • [3] Effect of carbon addition on the microstructures and mechanical properties of gamma-TiAl alloys
    Tian, WH
    Nemoto, M
    INTERMETALLICS, 1997, 5 (03) : 237 - 244
  • [4] Effect of nitrogen addition on microstructures and mechanical propeties of TiAl based alloys
    Tang, JC
    Huang, BY
    He, YH
    Xie, K
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1999, 9 (04) : 692 - 695
  • [5] Effect of nitrogen addition on microstructures and mechanical propeties of TiAl based alloys
    唐建成
    黄伯云
    贺跃辉
    谢鲲
    Transactions of Nonferrous Metals Society of China, 1999, (04) : 692 - 695
  • [6] Effect of Fe and Mo additions on microstructure and mechanical properties of TiAl intermetallics
    Qiu Cong-zhang
    Liu Yong
    Huang Lan
    Zhang Wei
    Liu Bin
    Lu Bin
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (03) : 521 - 527
  • [7] Mechanical properties of nanocrystalline tial-based intermetallics
    Bohn, R
    Oehring, M
    Pfullmann, T
    Appel, F
    Bormann, R
    PROCESSING AND PROPERTIES OF NANOCRYSTALLINE MATERIALS, 1996, : 355 - 366
  • [8] Microstructures and mechanical properties of cast TiAl alloys
    Hangkong Cailiao Xuebao, 3 (29-33):
  • [9] The effect of Ruthenium addition on the microstructure and mechanical properties of TiAl alloys
    Liu, Q.
    Nash, P.
    INTERMETALLICS, 2011, 19 (09) : 1282 - 1290
  • [10] Microstructure Refinement and Improvement of Mechanical Properties of as-cast TiAl Based Intermetallics with Yttrium and Boron Addition
    Yang Xin
    Xi Zhengping
    LiuYong
    Tang Huiping
    Jia Wenpeng
    HeWeiwei
    Liu Haiyan
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II, 2012, : 1571 - 1574
12345