TerraSAR-X payload data processing -: First experiences

In February 2007 the German TerraSAR-X satellite will be launched and the TerraSAR-X mission will enter its approximately 5 months commissioning phase. At that time, the challenging developments on both sides, the advanced high-resolution multi-mode SAR instrument on the one hand and the corresponding sophisticated TerraSAR-X ground segment on the other hand will prove correct interaction and functioning. Screening and processing of the SAR data is the task of the DLR developed TerraSAR Multi Mode SAR Processor TMSP. Preceded by data reception, transcription including decryption and followed by archiving, cataloguing and product delivery, processing of the data by the TMSP is the central part of the SAR data workflow implemented in the Payload Ground Segment PGS. Space and ground segment have been subject to intense complete system testing on ground. Here, the compatibility of SAR instrument commanding, SAR instrument operations and subsequent SAR data processing has been successfully proven for the various acquisition modes of the sensor. Compliance of specified and measured product performance has been investigated as far as possible utilizing simulated point target SAR data. However, the real challenge will be the screening and SAR processing of TerraSAR-X data acquired in orbit and linked down to the receiving station. Therefore, the complete reception and processing chain will be properly tuned and adjusted to the properties of the received TerraSAR-X payload data. The TMSP algorithms have to be configured, e.g. thresholds for calibration pulse analysis, estimation window sizes for SAR data analysis, parameterization of estimation algorithms. Also the configuration of product variants with respect to resolution and radiometric quality will be checked and refined. This paper presents the very first experiences in reception, transcription, screening and processing of TerraSAR-X data with respect to performance, throughput and quality. During the TMSP checkout phase the compatibility of instrument commanding and SAR processing have to be verified and the accordance of SAR performance prediction and the obtained product performance and quality have to be investigated. First characteristics of the SAR data with respect to raw data statistics, calibration pulse analysis and Doppler centroid measurements will be shown. As far as available examples of SAR image products featuring the different image modes, Stripmap, ScanSAR and Spotlight at different incidence angles and polarizations will be displayed and a first estimate of product performance parameters will be given.