Examination of lubricant oil components affecting the formation of combustion chamber deposit in a two-stroke engine

被引：9
|
作者：
Fukui, M
Sato, T
Fujita, N
Kitano, M
机构：
[1] Iwate Univ, Morioka, Iwate 0208551, Japan
[2] Iwate Ind Technol Jr Coll, Shiwa, Iwate 0283615, Japan
来源：
JSAE REVIEW | 2001年 / 22卷 / 03期
关键词：
Addition reactions - Autoclaves - Detergents - Fuels - Lubricating oils - Pressure effects;
D O I：
10.1016/S0389-4304(01)00115-1
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this study, influence of fuel and lubricant oil components on the combustion chamber deposit (CCD) formation was investigated using both a two-stroke engine and an autoclave. The results obtained show that the influence of lubricant oil on CCD formation was greater than that of the fuel and most CCD was formed from the detergent dispersant added to the lubricant oil. In particular the metallic detergent formed a larger amount of CCD than the ashless dispersant. The influence of deposit formation under the low-pressure condition on CCD accumulation at the engine appeared to be greater than that of deposit formation under the high-pressure condition. (C) 2001 Society of Automotive Engineers of Japan, Inc. and Elsevier Science B.V. All rights reserved.
引用
收藏
页码：281 / 285
页数：5
相关论文
共 50 条
  • [1] The combustion chamber deposit formation on a piston crown of a small two-stroke cycle engine
    Abliz, I. (t5203001@iwate-u.ac.jp), 2005, Japan Society of Mechanical Engineers (71):
  • [2] A study on combustion chamber deposit formation on a piston crown of a small two-stroke cycle engine (relation between a lubricant oil flow and CCD formation pattern in a cylinder)
    Kon H.
    Fujita N.
    Hirose K.
    Abulizi Y.
    Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 2010, 76 (772): : 2264 - 2271
  • [3] A study of combustion chamber deposit formation in small two-stroke cycle engines
    Fujita, N
    Abulizi, Y
    Kitano, M
    Yoshida, H
    PROGRESS IN EXPERIMENTAL AND COMPUTATIONAL MECHANICS IN ENGINEERING, 2003, 243-2 : 225 - 230
  • [4] Dynamic and Thermodynamic Examination of a Two-Stroke Internal Combustion Engine
    Ipci, Duygu
    Karabulut, Halit
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2016, 19 (02): : 141 - 154
  • [5] Comparison of viscosity characteristics of soybean oils with a mineral oil two-stroke engine lubricant
    Fernando, Sandun
    Hanna, Milford
    Transactions of the American Society of Agricultural Engineers, 2001, 44 (06): : 1403 - 1407
  • [6] Comparison of viscosity characteristics of soybean oils with a mineral oil two-stroke engine lubricant
    Fernando, S
    Hanna, M
    TRANSACTIONS OF THE ASAE, 2001, 44 (06): : 1403 - 1407
  • [7] The crank lever chamber irrigation of a two-stroke engine
    Holm, O
    ZEITSCHRIFT DES VEREINES DEUTSCHER INGENIEURE, 1927, 71 : 847 - 850
  • [8] Fuel lubricant and additive effects in combustion chamber deposit formation
    Kelemen, SR
    Homan, HS
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1996, 211 : 30 - PETR
  • [9] Design of combustion chamber program of two-stroke direct injection spark ignition engine based on the CFD
    Zhu, Cheng
    Yang, Hai-Qing
    Wang, Ming-Sheng
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2013, 28 (12): : 2737 - 2745
  • [10] Output Performance Increase of Two-stroke Combustion Engine with Detonation Combustion Optimization
    Puskar, Michal
    Bigos, Peter
    STROJARSTVO, 2010, 52 (05): : 577 - 587
12345