A review on geothermal energy resources in India: past and the present

By 2040, India hopes to have completed its energy supply to fulfill the country's rising energy demands. Renewable and conventional sources must be used in an environmentally acceptable manner to achieve sustainable growth. India must enhance its use of renewable and clean energy sources, including geothermal, wind, and solar, to satisfy its growing demand. While solar and wind energy output has increased significantly, geothermal energy has yet to be fully harnessed. Among the many forms of geothermal energy found on the surface are volcanoes, fumaroles, erupting geysers, steaming fields, and hot springs. A total of about 340 geothermal springs may be found in India, spread throughout both orogenic (in the Himalayas) and non-orogenic (in the Peninsula). There were 31 places extensively evaluated, and deep drilling was performed in sixteen of them. Average temperatures range from 35.0 degrees C to the boiling point of water in these springs. Medium (100.0-200.0 degrees C) and low (100 degrees C) enthalpy geothermal energy resources/systems are found in India, with the latter being the most abundant. The essential component of a geothermal system is understanding the heat source and harnessing it. Studies so far have indicated that some geothermal areas have sufficient geothermal potential for direct heat usage and power generation. If the Puga (J&K) field is explored to a depth of at least 500 m, reservoir simulation studies have shown that it might produce more than 3 MW of power. India's diverse geothermal sites and the current status of exploration for future research are discussed in the paper.