Optimizing the Intercrystallite Connection of a Donor-Acceptor Conjugated Semiconductor Polymer by Controlling the Crystallization Rate via Temperature

The charge carrier transport of conjugated polymer thin film is mainly decided by the crystalline domain and intercrystallite connection. High-density tie-chain can provide an effective bridge between crystalline domains. Herein, the tie-chain connection behavior is optimized by decreasing the crystal region length (l(c)) and increasing the crystallization rate. Poly[4-(4,4-bis(2-octyldodecyl)-4H-cyclopenta[1,2-b:5,4-b ']dithiophen-2-yl)-alt-[1,2,5]-thiadiazolo[3,4-c]pyridine] (PCDTPT-ODD) is dissolved in nonpolar solvent isooctane and high ordered rod-like aggregations are formed. As the temperature increases, the changes in solution state and crystallization behavior lead to three different chain arrangement morphologies in the films: 1) at 25 degrees C, large and separated crystal regions are formed; 2) at 55 degrees C, small and well-connected crystal regions are formed due to faster crystallization rate and smaller nucleus size; 3) at 90 degrees C, the amorphous film is formed. Further results show that the film prepared at 55 degrees C has a smaller crystal region length (l(c), 7.6 nm) and higher tie-chains content. Thus, the film exhibits the best device mobility of 2.3 x 10(-3) cm(2) V-1 s(-1). This result shows the great influence of crystallization kinetics on the microstructure of conjugated polymer films and provides an effective way for the optimization of the intercrystallite tie-chain.