Reproportioning of steel fibre reinforced concrete mixes and their impact resistance

被引：93

作者：

Nataraja, MC ^{[1
]}

Nagaraj, TS

Basavaraja, SB

机构：

[1] Sri Jayachamarajendra Coll Engn, Mysore 570006, Karnataka, India

[2] Univ Massachusetts, Amherst, MA 01003 USA

[3] RV Coll Engn, Bangalore, Karnataka, India

[4] JSS Womens Polytech, Mysore 570006, Karnataka, India

来源：

CEMENT AND CONCRETE RESEARCH | 2005年 / 35卷 / 12期

关键词：

mixture proportioning; fibre reinforcement; mechanical properties; compressive strength and workability;

D O I：

10.1016/j.cemconres.2005.06.011

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

In this experimental investigation, a practical rapid method of proportioning steel fibre reinforced concrete (SFRC) mixes is developed and validated. The basis for developing this is to use the reproportioning method, which has already been developed for proportioning normal density cement concrete mixes, for SFRC mixes. Based on the results of the trial mix, two SFRC mixes having 28 day target strength of 30 and 50 MPa are designed using this technique and examined regarding its validation. In addition, the impact resistance of these reproportioned Plain Concrete (PC) and SFRC is studied at 7 and 28 days. It is observed that the SFRC has developed significant impact resistance even for a small addition of steel fibres. Pulse velocity test is conducted at different ages to assess the quality of concrete. It is found that all concrete specimens could be classified under good quality. (c) 2005 Elsevier Ltd. All rights reserved.

引用

页码：2350 / 2359

页数：10

共 50 条

[1] REPROPORTIONING CONCRETE MIXES
NAGARAJ, TS
SHASHIPRAKASH, SG
PRASAD, BKR
ACI MATERIALS JOURNAL, 1993, 90 (01) : 50 - 58
[2] Impact resistance of steel fibre reinforced concrete
Structural Engineering Research Cent, Madras, India
Indian Concr J, 5 (257-262):
[3] IMPACT RESISTANCE OF STEEL FIBRE REINFORCED CONCRETE
Rehacek, S.
Simunek, I.
Kolisko, J.
Hunka, P.
FIBRE CONCRETE 2011: TECHNOLOGY, DESIGN, APPLICATION, 2011, : 411 - 418
[4] REPROPORTIONING CONCRETE MIXES - DISCUSSION
ARIOGLU, E
ACI MATERIALS JOURNAL, 1993, 90 (06) : 631 - 632
[5] Proportioning of Steel Fibre Reinforced Concrete Mixes for Pavement Construction and Their Impact on Environment and Cost
Achilleos, Constantia
Hadjimitsis, Diofantos
Neocleous, Kyriacos
Pilakoutas, Kypros
Neophytou, Pavlos O.
Kallis, Stelios
SUSTAINABILITY, 2011, 3 (07): : 965 - 983
[6] Fibre concrete mixes: In between plain and reinforced concrete?
René Braam, C.
Van Leest, Adrian J.
Van Hartskamp, Steef B.
Jurriaans, George
Van Der Steen, Come A.
Stet, Marc J. A.
Carreteras, 2009, 4 (166): : 78 - 86
[7] Effect of Thickness and Fibre Volume Fraction on Impact Resistance of Steel Fibre Reinforced Concrete (SFRC)
Muda, Zakaria Che
Usman, Fathoni
Syamsir, Agusril
Yang, Chen Shao
Mustapha, Kamal Nasharuddin
Beddu, Salmia
Thiruchelvam, Sivadass
Kamal, Nur Liyana Mohd
Alam, Md Ashraful
Birima, Ahmed H.
Itam, Zarina
Zaroog, O. S.
INTERNATIONAL CONFERENCE ON ADVANCES IN RENEWABLE ENERGY AND TECHNOLOGIES (ICARET 2016), 2016, 32
[8] Impact resistance of steel-fibre-reinforced lightweight-aggregate concrete
Wang, L.
Wang, H.
Jia, J.
MAGAZINE OF CONCRETE RESEARCH, 2009, 61 (07) : 539 - 547
[9] Flexural toughness and impact resistance of steel-fibre-reinforced lightweight concrete
Zhang, MH
Li, L
Paramasivam, P
MAGAZINE OF CONCRETE RESEARCH, 2004, 56 (05) : 251 - 262
[10] Impact Resistance of Fibre-reinforced Concrete
Rehacek, Stanislav
Hunka, Petr
Citek, David
Kolisko, Jiri
Simunek, Ivo
SPECIAL CONCRETE AND COMPOSITES 2014, 2014, 1054 : 48 - 53

← 1 2 3 4 5 →