OPERATIONAL MODAL ANALYSIS FOR ROTATING MACHINES: CHALLENGES AND SOLUTIONS

被引：0

作者：

Di Lorenzo, E. ^{[1
]}

Manzato, S. ^{[2
]}

Peeters, B. ^{[3
]}

Marulo, F. ^{[4
]}

Desmet, W. ^{[5
]}

机构：

[1] Siemens Ind Software NV, Interleuvenlaan 68, B-3000 Leuven, Belgium

[2] Siemens Ind Software NV, Struct, Interleuvenlaan 68, B-3000 Leuven, Belgium

[3] Siemens Ind Software NV, Struct & Environm, Interleuvenlaan 68, B-3000 Leuven, Belgium

[4] Univ Naples Federico II, Dept Ind Engn, Naples, Italy

[5] Katholieke Univ Leuven, Div PMA, Leuven, Belgium

来源：

7TH IOMAC: INTERNATIONAL OPERATIONAL MODAL ANALYSIS CONFERENCE | 2017年

关键词：

Order tracking; Operational Modal Analysis; Rotating machines; Gear test rig;

D O I：

暂无

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Operational Modal Analysis (OMA) is widely employed and became an industrial standard technique for identifying the modal parameters (i.e. resonance frequencies, damping ratios and mode shapes) of mechanical structures. Several hypothesis need to be verified in order to apply OMA. First of all the structure must be Linear Time Invariant (LTI), but this is not the case if several parts are moving with respect to each other. Secondly, the forces acting on the structure must be represented by white noise in the frequency range of interest. This is not valid anymore if periodical loads due to rotating elements are introduced in the system. The main scope of this paper is to fully understand and propose solutions to the challenges and the limitations occurring when applying classical OMA techniques in case of rotating machines.

引用

页码：106 / 109

页数：4

共 50 条

[1] Long term operational modal analysis for rotating machines
Gioia, N.
Daems, P. J.
Guillaume, P.
Helsen, J.
SCIENCE OF MAKING TORQUE FROM WIND (TORQUE 2018), 2018, 1037
[2] Operational Modal Analysis of Rotating Machinery
Gres, S.
Andersen, P.
Damkilde, L.
ROTATING MACHINERY, VIBRO-ACOUSTICS & LASER VIBROMETRY, VOL 7, 2019, : 67 - 75
[3] Operational Modal Analysis on Structures with Rotating Parts
Jacobsen, N-J.
Andersen, P.
PROCEEDINGS OF ISMA 2008: INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING, VOLS. 1-8, 2008, : 2491 - +
[4] Operational Modal Analysis of a Rotating Helicopter Blade
Agneni, A.
Coppotelli, G.
Grappasonni, C.
PROCEEDINGS OF ISMA2010 - INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING INCLUDING USD2010, 2010, : 3249 - 3262
[5] Operational Modal Analysis for Crack Detection in Rotating Blades
Bednarz, Jaroslaw
ARCHIVES OF ACOUSTICS, 2017, 42 (01) : 105 - 112
[6] Research in the operational modal analysis of rotating machinery reducer
1600, International Frequency Sensor Association, 46 Thorny Vineway, Toronto, ON M2J 4J2, Canada (155):
[7] Operational Modal Analysis of Torsional Modes in Rotating Machinery
Carden, Eoin Peter
Lindblad, Mattias
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2015, 137 (02):
[8] Challenges in operational modal analysis of suspension bridges
Grimmelsman, K. A.
Aktan, A. E.
PROCEEDINGS OF ISMA2006: INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING, VOLS 1-8, 2006, : 2961 - +
[9] OPERATIONAL MODAL ANALYSIS OF TORSIONAL MODES IN ROTATING MACHINERY
Carden, Eoin Peter
Lindblad, Mattias
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 7A, 2014,
[10] Modal characterisation of rotating machines
Gutiérrez-Wing, ES
Ewins, DJ
PROCEEDINGS OF IMAC-XIX: A CONFERENCE ON STRUCTURAL DYNAMICS, VOLS 1 AND 2, 2001, 4359 : 1249 - 1256

← 1 2 3 4 5 →