Solid particle erosion of HVOF sprayed NiCr and Stellite-6 coatings

被引：73
|
作者：
Sidhu, Hazoor Singh
Sidhu, Buta Singh
Prakash, S.
机构：
[1] Punjabi Univ, Yadvindra Coll Engn, Dept Mech Engn, Bathinda 151302, Punjab, India
[2] GZS Coll Engn & Technol, Dept Mech Engn, Bathinda 151001, Punjab, India
[3] Indian Inst Technol, Dept Met & Mat Engn, Roorkee 247667, Uttar Pradesh, India
来源：
SURFACE & COATINGS TECHNOLOGY | 2007年 / 202卷 / 02期
关键词：
HVOF thermal spray process; erosion; NiCr and stellite-6 coating;
D O I：
10.1016/j.surfcoat.2007.05.035
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Solid particle erosion behavior of the HVOF deposited NiCr and Stellite-6, coatings on boiler tube steels was evaluated. The study was conducted, using an air jet erosion test rig at a velocity of 26 m/s and impingement angle of 30 degrees and 90 degrees, on uncoated as well as HVOF spray coated boiler tube steel (GrAl) at 250 degrees C. The coatings were harder as compared to substrate steel. Scanning electron microscopy (SEM) technique was used to analyse the eroded surface. Mass losses of the coatings were found marginally higher than the boiler tube steel. (c) 2007 Elsevier B.V All rights reserved.
引用
收藏
页码：232 / 238
页数：7
相关论文
共 50 条
  • [1] Properties of HVOF-sprayed Stellite-6 coatings
    Sassatelli, Paolo
    Bolelli, Giovanni
    Gualtieri, Magdalena Lassinantti
    Heinonen, Esa
    Honkanen, Mari
    Lusvarghi, Luca
    Manfredini, Tiziano
    Rigon, Rinaldo
    Vippola, Minnamari
    SURFACE & COATINGS TECHNOLOGY, 2018, 338 : 45 - 62
  • [2] Hot Corrosion Behaviour of HVOF Sprayed Stellite-6 Coatings on Gas Turbine Alloys
    Jegadeeswaran, N.
    Ramesh, M. R.
    Prakrathi, S.
    Bhat, K. Udaya
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2014, 67 (01) : 87 - 93
  • [3] Hot Corrosion Behaviour of HVOF Sprayed Stellite-6 Coatings on Gas Turbine Alloys
    N. Jegadeeswaran
    M. R. Ramesh
    S. Prakrathi
    K. Udaya Bhat
    Transactions of the Indian Institute of Metals, 2014, 67 : 87 - 93
  • [4] Microstructure and High-temperature Tribological Properties of HVOF Sprayed CoCrWSi and Stellite-6 Coatings
    Chen, Jirong
    Zhang, Jin
    Wang, Wei
    Cao, Xiaoying
    Wang, Qinying
    Yuan, Haogui
    Surface Technology, 2024, 53 (19): : 212 - 222
  • [5] Erosion-corrosion of plasma as sprayed and laser remelted Stellite-6 coatings in a coal fired boiler
    Sidhu, Buta Singh
    Prakash, S.
    WEAR, 2006, 260 (9-10) : 1035 - 1044
  • [6] Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings
    Ramesh, M. R.
    Prakash, S.
    Nath, S. K.
    Sapra, Pawan Kumar
    Venkataraman, B.
    WEAR, 2010, 269 (3-4) : 197 - 205
  • [7] Room temperature erosion studies on titanium alloy and stellite-6 coatings
    Jegadeeswaran, N.
    Babu, K. Anand
    Raju, B. S.
    Manjunath, L. H.
    Somasundaram, B.
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 365 - 371
  • [8] Influence of laser irradiation on deposition characteristics of cold sprayed Stellite-6 coatings
    Li, Bo
    Jin, Yan
    Yao, Jianhua
    Li, Zhihong
    Zhang, Qunli
    Zhang, Xin
    OPTICS AND LASER TECHNOLOGY, 2018, 100 : 27 - 39
  • [9] Solid particle erosion behavior of HVOF/HVAF sprayed WC-Co-Cr coatings
    Li, Yang
    Lian, Ying
    Cao, Jingjing
    Li, Li
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2016, 230 (06) : 634 - 643
  • [10] Evaluation of residual stress in HVOF stellite-6 coatings using non-contact drilling
    Azizpour, M. Jalali
    Tolouei-Rad, M.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (06)
12345