Processing and properties of ultrahigh-carbon (1.6%C) steel

被引：14
|
作者：
Zhang, Zhan-Ling [1 ]
Liu, Yong-Ning [1 ]
Zhu, Jie-Wu [1 ]
Yu, Guang [1 ]
机构：
[1] Xian Jiaotong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 483-84卷
基金：
中国国家自然科学基金;
关键词：
ultrahigh-carbon steel; ultrafine grains; mechanical properties; fracture mechanism;
D O I：
10.1016/j.msea.2006.09.145
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An ultrahigh-carbon steel containing 1.6 wt.% carbon (UHCS-1.6C) was processed to obtain ultrafine spheroidized ferrite, pearlite and tempered martensite, respectively. The tensile properties of these structures were evaluated at room temperature. The ultimate tensile strengths of UHCS-1.6C ranged from 930 to 1570 MPa, elongations to failure from 4.4 to 19%, and yield ratios from 0.65 to 0.92. The fracture mechanisms of these structures were clarified based on an examination to the fracture surfaces. The present results indicate that ultrahigh-carbon steels can be easily processed to achieve unique microstructures and properties. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：64 / 66
页数：3
相关论文
共 50 条
  • [1] Semi-solid processing of ultrahigh-carbon steel castings
    Ramadan, Mohamed
    Takita, Mitsuharu
    Nomura, Hiroyuki
    El-Bagoury, Nader
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 430 (1-2): : 285 - 291
  • [2] Processing, structure, and properties of a rolled, ultrahigh-carbon steel plate exhibiting a damask pattern
    Taleff, EM
    Bramfitt, BL
    Syn, CK
    Lesuer, DR
    Wadsworth, J
    Sherby, OD
    MATERIALS CHARACTERIZATION, 2001, 46 (01) : 11 - 18
  • [3] INFLUENCE OF MICROSTRUCTURE ON TENSILE PROPERTIES OF SPHEROIDIZED ULTRAHIGH-CARBON (1.8-PCT-C) STEEL
    SYN, CK
    LESUER, DR
    SHERBY, OD
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (07): : 1481 - 1493
  • [4] Superplasticity in ultrahigh carbon (1.6 Pct C) steel
    Zhang, Z. L.
    Liu, Y. N.
    Zhu, J. W.
    Guang, Y. U.
    SUPERPLASTICITY IN ADVANCED MATERIALS, 2007, 551-552 : 199 - +
  • [5] Influence of severe plastic deformation on the structure and properties of ultrahigh-carbon steel wire
    Lesuer, DR
    Syn, CK
    Oleg, OD
    INVESTIGATIONS AND APPLICATIONS OF SEVERE PLASTIC DEFORMATION, 2000, 80 : 357 - 366
  • [6] Influence of aluminum on microstructure and mechanical properties of spray formed ultrahigh-carbon steel
    Shanghai Key Lab of Functional Metallic Materials, Tongji University, Shanghai 200092, China
    不详
    Kang T'ieh, 2006, 7 (69-73+78):
  • [7] Self-superplasticization of spray formed ultrahigh-carbon steel
    Lin, Yi-Jian
    Zhang, Jing-Guo
    Li, Xiao-Jun
    Shi, Hai-Sheng
    Zhou, Can-Dong
    Kang T'ieh/Iron and Steel (Peking), 2007, 42 (07): : 59 - 63
  • [8] Mechanical behavior of an ultrahigh-carbon steel exhibiting a damask surface pattern
    Taleff, EM
    Bramfitt, BL
    Syn, CK
    Lesuer, DR
    Sherby, OD
    THERMOMECHANICAL PROCESSING AND MECHANICAL PROPERTIES OF HYPEREUTECTOID STEELS AND CAST IRONS, 1996, : 189 - 198
  • [9] Novel Method for Refining Coarse Eutectic Carbides in Ultrahigh-Carbon Steel
    Liu, Qingsuo
    Wang, Fang
    Zhang, Xin
    Wang, Huibin
    Li, Jinman
    METAL SCIENCE AND HEAT TREATMENT, 2020, 61 (9-10) : 543 - 546
  • [10] Novel Method for Refining Coarse Eutectic Carbides in Ultrahigh-Carbon Steel
    Qingsuo Liu
    Fang Wang
    Xin Zhang
    Huibin Wang
    Jinman Li
    Metal Science and Heat Treatment, 2020, 61 : 543 - 546
12345