Effect of Point Angle in Twist Drill Bit on Delamination in CFRP

被引：0
|
作者：
Tejas, N. [1 ]
Cadambi, Rahul M. [1 ]
机构：
[1] Ramaiah Univ Appl Sci, 470-P Peenya Ind Area,4th Phase, Bangalore 560058, Karnataka, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
CFRP; Drilling; Delamination; Finite Element Analysis; Point Angle; COMPOSITES; GEOMETRY; WEAR;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Drilling of composites are generally associated with fiber pull out and delamination. The aim of this paper is to optimize the drilling process parameters and study the influence of twist drill bit geometry like point angle on delamination by FE analysis and experimental studies. Using DOE technique, different speeds and feed rates are used to carry out drilling of CFRP laminates experimentally and by ABAQUS. Delamination area of CFRP drilled hole from simulation and experimental results are analysed using Image J software. Speed of 3500 rpm and a feed rate of 0.1 mm/rev is found to be optimum value. Further, point angle in drill bit geometry is modified to 90(0), 118(0) and 135(0) and effect of delamination is simulated and studied using ABAQUS. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1278 / 1282
页数：5
相关论文
共 50 条
  • [1] Effects of Twist Drill Point Angle on Thrust Force and Delamination Factor in Hybrid Fiber Composites Drilling
    Maoinser, Mohd Azuwan
    Ahmad, Faiz
    Shariff, Safian
    Keong, Woo Tze
    ADVANCES IN MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 564 : 501 - +
  • [2] The relationship between feed rate and point angle of a twist drill bit when drilling bone
    Davis, J.K.
    Jackson, C.J.
    Scott, I.
    Engineering in Medicine, 1980, 9 (03): : 137 - 142
  • [3] Novel drill bit based on the step-control scheme for reducing the CFRP delamination
    Su, Fei
    Zheng, Lei
    Sun, Fujian
    Wang, Zhenhua
    Deng, Zhaohui
    Qiu, Xinyi
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 262 : 157 - 167
  • [4] Effect of eccentricity of twist drill and candle stick drill on delamination in drilling composite materials
    Tsao, CC
    Hocheng, H
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (02): : 125 - 130
  • [5] Effect of delamination interface angle on Mode II delamination behavior of CFRP laminates
    Zhao Wei
    Wang Ya-na
    Wang Xiang
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2019, 47 (09): : 152 - 159
  • [6] Effects of Cutting Parameters and Point Angle on Thrust Force and Delamination in Drilling of CFRP
    Yardimeden, Ahmet
    Kilickap, Erol
    Celik, Yahya Hisman
    MATERIALS TESTING, 2014, 56 (11-12) : 1042 - 1048
  • [7] Chisel Edge Effect on Delamination when Drilling Thick Composite Materials with a Twist Drill
    Rahme, P.
    Landon, Y.
    Lagarrigue, P.
    Lachaud, F.
    Piquet, R.
    Marguet, B.
    Bourriquet, J.
    Le Roy, C.
    SAE INTERNATIONAL JOURNAL OF AEROSPACE, 2009, 1 (01): : 776 - 781
  • [8] Effect of Helical Drill Points on Delamination in Drilling Carbon Fiber Reinforced Plastics (CFRP)
    Zou, P.
    Yang, X. L.
    Li, X. Y.
    ADVANCES IN ABRASIVE TECHNOLOGY XII, 2009, 76-78 : 618 - 623
  • [9] The dynamic geometry of a twist drill point
    Salama, AS
    ElSawy, AH
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 56 (1-4) : 45 - 53
  • [10] Influence of Point Angle on Drill Hole Quality and Machining Forces when Drilling CFRP
    Heisel, Uwe
    Pfeifroth, Tobias
    FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 471 - 476
12345