Foam extrusion of thermoplastic elastomers using CO2 as blowing agent

被引：0
|
作者：
Kropp, D
Michaeli, W
Herrmann, T
Schroder, O
机构：
来源：
ANTEC'97 - PLASTICS SAVING PLANET EARTH, CONFERENCE PROCEEDINGS, VOLS 1 - 3 | 1997年
关键词：
thermoplastic elastomers; CO2; foamability; nucleating agent;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An experimental investigation was conducted to research the foamability of different thermoplastic elastomers (TPE) using CO2 as blowing agent and Hydrocerol as nucleating agent. For each material, different foaming temperatures as well as blowing and nucleating agent percentages were examined. A specific TPU-type showed the best foamability, a SEES-type was also successfully foamed and a PP/EPDM-blend especially developed for foaming with water was most difficult to foam with CO2 as blowing agent.
引用
收藏
页码：3473 / 3478
页数：6
相关论文
共 50 条
  • [1] Foam extrusion of thermoplastic elastomers using CO2 as blowing agent
    Kropp, D
    Michaeli, W
    Herrmann, T
    Schroder, O
    JOURNAL OF CELLULAR PLASTICS, 1998, 34 (04) : 304 - +
  • [2] Foam extrusion of thermoplastic polyurethanes (TPU) using CO2 as a blowing agent
    Michaeli, W
    Heinz, R
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2000, 284 (11-12) : 35 - 39
  • [3] Foam Extrusion of Elastomers using Water as Physical Blowing Agent
    Hopmann, Christian
    Kammer, Sebastian
    Fey, Fabian
    Facklam, Martin
    ADVANCES IN POLYMER PROCESSING 2020: PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON PLASTICS TECHNOLOGY, 2020, : 63 - 78
  • [4] Foam Extrusion of LDPE With Solid Phase CO2 as Blowing Agent
    Hopmann, Christian
    Hendriks, Sven
    Feldges, Robert
    POLYMER ENGINEERING AND SCIENCE, 2015, 55 (12): : 2821 - 2828
  • [5] Foam extrusion of polypropylene-rice husk composites using CO2 as the blowing agent
    Yeh, Shu-Kai
    Yang, Ssu-Hsuan
    Han, Long
    Liu, Hung-Yun
    Liao, Yi-Syun
    Chang, Yi-Chun
    JOURNAL OF CELLULAR PLASTICS, 2019, 55 (04) : 401 - 419
  • [6] FOAM EXTRUSION CHARACTERISTICS OF THERMOPLASTIC RESIN WITH FLUOROCARBON BLOWING AGENT .2. POLYSTYRENE FOAM EXTRUSION
    MA, CY
    HAN, CD
    JOURNAL OF APPLIED POLYMER SCIENCE, 1983, 28 (09) : 2983 - 2998
  • [7] STUDY OF FOAM EXTRUSION USING A CHEMICAL BLOWING AGENT
    HAN, CD
    KIM, YW
    MALHOTRA, KD
    JOURNAL OF APPLIED POLYMER SCIENCE, 1976, 20 (06) : 1583 - 1595
  • [8] FOAM EXTRUSION CHARACTERISTICS OF THERMOPLASTIC RESIN WITH FLUOROCARBON BLOWING AGENT .1. LOW-DENSITY POLYETHYLENE FOAM EXTRUSION
    HAN, CD
    MA, CY
    JOURNAL OF APPLIED POLYMER SCIENCE, 1983, 28 (09) : 2961 - 2982
  • [9] Tailoring Epoxy Foam Properties with an Innovative Process Approach Using CO2 as A Blowing Agent
    Kaysser, Simon T.
    Keun, Christian A.
    Bethke, Christian
    Altstaedt, Volker
    SAMPE JOURNAL, 2022, 58 (06) : 20 - 32
  • [10] Extrusion foam coating of coaxial cables using chemical blowing agent
    Marvian, M. Nazari
    Behravesh, A. H.
    Golzar, M.
    CELLULAR POLYMERS, 2008, 27 (01) : 27 - 41
12345