Influence of Cr and Si Addition on Structural and Mechanical Properties of TiAlN Coatings Reactively Sputter Deposited

被引：1

作者：

Dehlinger, Anne-Sophie ^{[1
]}

Lapostolle, Frederic ^{[1
]}

Lamy, Sophie ^{[1
]}

Rapaud, Olivier ^{[1
]}

Meunier, Cathy ^{[2
]}

Brien, Valerie ^{[3
]}

Klein, Didier ^{[1
]}

Coddet, Christian ^{[1
]}

机构：

[1] UTBM, Lab Etudes & Rech Mat Procedes & Surfaces LERMPS, Belfort 90010, France

[2] UFC, Ctr Rech Ecoulements Surfaces & Transferts, F-25211 Montbeliard, France

[3] CNRS, Lab Phys Milieux Ionises & Applicat, UMR 7040, F-54506 Vandoeuvre Les Nancy, France

来源：

PLASMA PROCESSES AND POLYMERS | 2007年 / 4卷

关键词：

magnetron; sputtering; thin films; nitrides; ceramics; oxidation; hardness; scratch test;

D O I：

10.1002/ppap.200731411

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

The possibilities offered by magnetron sputtering to obtain Si and Cr enriched (Ti-x,Al-y)N coatings are presented, correlating coatings properties to the deposition parameters. After a theoretical study of the sputtering conditions, the coatings deposition was achieved using a TiAl (50-50 at%) target, with Cr and Si inserts distributed onto its erosion track in order to reach the desired composition. Composition and structural evolution were determined by means of GDOES and XRD. Oxidation resistance of the coatings, as a function of structure and composition, was tested at 900 degrees C. Mechanical tests were performed by means of unidirectional multi-pass scratch testing under constant load showing interesting performances.

引用

页码：S588 / S592

页数：5

共 50 条

[1] Structural and Mechanical Properties of (Al,Cr)N and (Al,Cr)SiN Coatings Reactively Sputter Deposited
Briois, Pascal
Mercs, David
Banakh, Oksana
Lamy, Sophie
Steinmann, Pierre Albert
Coddet, Christian
PLASMA PROCESSES AND POLYMERS, 2007, 4 : S677 - S680
[2] Mechanical and tribological properties of Cr-N and Cr-SI-N coatings reactively sputter deposited
Mercs, D
Bonasso, N
Naamane, S
Bordes, JM
Coddet, C
SURFACE & COATINGS TECHNOLOGY, 2005, 200 (1-4): : 403 - 407
[3] Influence of oxygen flow rate on the structural and mechanical properties of reactively magnetron sputter-deposited Zr-B-O coatings
Pierson, JF
Billard, A
Belmonte, T
Michel, H
Frantz, C
THIN SOLID FILMS, 1999, 347 (1-2) : 78 - 84
[4] Electrical and structural investigations of perovskite structure reactively sputter deposited coatings
Yazdi, M. Arab Pour
Briois, P.
Georges, S.
Billard, A.
SOLID STATE IONICS, 2009, 180 (23-25) : 1246 - 1251
[5] Structure/mechanical properties relationship of titanium-oxygen coatings reactively sputter-deposited
Lapostolle, F
Billard, A
von Stebut, J
SURFACE & COATINGS TECHNOLOGY, 2000, 135 (01): : 1 - 7
[6] Structural and mechanical properties of room temperature sputter deposited CrN coatings
Raman, K. H. Thulasi
Kiran, M. S. R. N.
Ramamurty, U.
Rao, G. Mohan
MATERIALS RESEARCH BULLETIN, 2012, 47 (12) : 4463 - 4466
[7] The influence of growth defects in sputter-deposited TiAlN hard coatings on their tribological behavior
Drnovsek, Aljaz
Panjan, Peter
Panjan, Matjaz
Cekada, Miha
SURFACE & COATINGS TECHNOLOGY, 2016, 288 : 171 - 178
[8] Influence of Growth Defects on the Corrosion Resistance of Sputter-Deposited TiAlN Hard Coatings
Panjan, Peter
Drnovsek, Aljaz
Gselman, Peter
Cekada, Miha
Panjan, Matjaz
Boncina, Tonica
Merl, Darja Kek
COATINGS, 2019, 9 (08)
[9] Mechanical properties of sputter-deposited nanocrystalline Cr3Si film
Xu, Jiang
Sun, Jian
Jiang, Shuyun
MATERIALS LETTERS, 2009, 63 (12) : 1082 - 1084
[10] Correlation of Microstructural and Mechanical Properties of CVD Deposited TiAlN Coatings
Soham Das
Ranjan Ghadai
Spandan Guha
Ashis Sharma
Bibhu P. Swain
Arabian Journal for Science and Engineering, 2020, 45 : 967 - 975

← 1 2 3 4 5 →