Tensile Properties of a Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures and Related Microstructural Characteristics

被引：0
|
作者：
Chen, Ssu-Ta [1 ]
Lui, Truan-Sheng [1 ]
Chen, Li-Hui [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 70101, Taiwan
来源：
TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES | 2010年
关键词：
friction stir process; tensile elongation; grain boundary sliding; GRAIN-SIZE; SUPERPLASTICITY; ALUMINUM; PRECIPITATION; FORMABILITY; STABILITY; WELDS;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Tensile tests of as extruded (F) and as friction stir processed (FFSP) Al-Cu 2218 alloy are conducted at elevated temperatures from room temperature to 450 degrees C, respectively. From room temperature to 300 degrees C, F samples perform a higher tensile flow stress than FFSP samples, and this is resulted from an effect of natural aging. On the other hand, the stable FFSP microstructures promote grain boundary sliding to occur and corresponds to higher strain hardening exponents. The remarkable increasing in tensile elongation of AF at 450 degrees C is ascribed mainly to the occurrence of grain boundary sliding.
引用
收藏
页码：129 / 138
页数：10
相关论文
共 50 条
  • [1] Examination of the tensile deformation resistance and ductility of friction stir processed Al-Cu 2218 alloy at elevated temperatures
    Department of Materials Science and Engineering, National Cheng Kung University, Tainan 70101, Taiwan
    不详
    Mater. Trans., 8 (1474-1480):
  • [2] Examination of the Tensile Deformation Resistance and Ductility of Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures
    Chen, Ssu-Ta
    Lui, Truan-Sheng
    Chen, Li-Hui
    MATERIALS TRANSACTIONS, 2010, 51 (08) : 1474 - 1480
  • [3] Microstructural stability of friction stirred AA. 2218 alloy on tensile properties at elevated temperature
    Chen, Ssu-Ta
    Lui, Truan-Sheng
    Chen, Li-Hui
    MATERIALS TRANSACTIONS, 2007, 48 (03) : 510 - 514
  • [4] Microstructure and Mechanical Properties of Friction Stir Repaired Al-Cu Casting Alloy
    Ji, Shude
    Huang, Ruofei
    Zhang, Liguo
    Meng, Xiangchen
    Lv, Zan
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (08) : 2057 - 2065
  • [5] MICROSTRUCTURE AND TENSILE PROPERTIES OF FRICTION-STIR-PROCESSED Al-Li-Cu-Zr-Sc ALLOY
    Song, Leipeng
    Zhang, Yang
    Wang, Jian
    Lu, Yalin
    MATERIALI IN TEHNOLOGIJE, 2020, 54 (05): : 589 - 593
  • [6] Tensile properties and fracture characteristics of ECAP-processed Al and Al-Cu alloys
    Mohamed Ibrahim Abd El Aal
    Nahed El Mahallawy
    Farouk A. Shehata
    Mohamed Abd El Hameed
    Eun Yoo Yoon
    Jung Hwan Lee
    Hyoung Seop Kim
    Metals and Materials International, 2010, 16 : 709 - 716
  • [7] Tensile Properties and Fracture Characteristics of ECAP-Processed Al and Al-Cu Alloys
    El Aal, Mohamed Ibrahim Abd
    El Mahallawy, Nahed
    Shehata, Farouk A.
    El Hameed, Mohamed Abd
    Yoon, Eun Yoo
    Lee, Jung Hwan
    Kim, Hyoung Seop
    METALS AND MATERIALS INTERNATIONAL, 2010, 16 (05) : 709 - 716
  • [8] Microstructure and Conductivity of the Al-Cu Joint Processed by Friction Stir Welding
    Wei, Yanni
    Li, Hui
    Xiao, Peng
    Zou, Juntao
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
  • [9] Microstructural evolution and mechanical properties of dissimilar Al-Cu joints produced by friction stir welding
    Tan, C. W.
    Jiang, Z. G.
    Li, L. Q.
    Chen, Y. B.
    Chen, X. Y.
    MATERIALS & DESIGN, 2013, 51 : 466 - 473
  • [10] TENSILE PROPERTIES AND MICROSTRUCTURAL EVOLUTION OF FRICTION STIR PROCESSED EXTRUDED AZ31B ALLOY
    Babu, S. Ramesh
    Kumar, V. S. Senthil
    Balasubramanian, V.
    Reddy, G. Madhusudhan
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 606 - +
12345