AN INVESTIGATION ON JOINABILITY OF THE AISI 304 AND AISI 430 STAINLESS STEEL BY TIG, MIG AND SHIELDED METAL ARC WELDING METHODS

被引：0

作者：

Kaya, Yakup ^{[1
]}

机构：

[1] Karabuk Univ, Tekn Egitim Fak, Baliklarkayasi Mevkii, TR-78050 Karabuk, Turkey

来源：

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY | 2010年 / 25卷 / 03期

关键词：

TIG; MIG; Shielded metal arc welding; austenitic stainless steel; ferritic stainless steel; MECHANICAL-PROPERTIES; HYDROGEN; GAS; JOINTS; ARGON; CR;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, AISI 430 ferritic stainless steel and AISI 304 austenitic stainless steel sheets with 3 mm thickness were joined by Tungsten Inert Gas (TIG), Metal Inert Gas (MIG) and shielded metal arc welding methods. Mechanical properties of the welded samples were investigated in terms of tensile strength, notch impact strength, microhardness and microstructure. The results of the tensile test indicated that fracture occurred at the HAZ of the ferritic stainless steel side in the all samples. The highest tensile strength in welded samples were obtained in the samples joined with TIG welding. According to the notch impact test, impact energy of the samples joined with TIG and MIG is higher than that of the samples joined with shielded metal arc welding. Microhardness test showed that the highest hardness was obtained in the HAZ at the AISI 430 stainless steel for all welding condition used in this work. According to microstructure investigation, it was observed that grain growth occurred in the HAZ of the AISI 430 ferritic stainless steel.

引用

页码：549 / 557

页数：9

共 50 条

[1] Investigation on aisi 430 ferritic stainless steel weldment by Tig, Mig welding and continuous drive friction welding
kumar, G. Senthil
Ramakrishnan, R.
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
[2] Laser Dissimilar Welding of AISI 430F and AISI 304 Stainless Steels
Pancikiewicz, Krzysztof
Swierczynska, Aleksandra
Hucko, Paulina
Tumidajewicz, Marek
MATERIALS, 2020, 13 (20) : 1 - 15
[3] Numerical and experimental investigation for the cladding of AISI 304 stainless steel on mild steel substrate using Gas Metal Arc Welding
Aslam, Mohd
Sahoo, Chinmaya Kumar
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 : 378 - 387
[4] Investigation of the effects of filler metal and number of passes used in AISI 304 stainless steel-copper joints by TIG welding
Semih Okan Yaz
Eren Yılmaz
Welding in the World, 2023, 67 : 1123 - 1132
[5] Investigation of the effects of filler metal and number of passes used in AISI 304 stainless steel-copper joints by TIG welding
Yaz, Semih Okan
Yilmaz, Eren
WELDING IN THE WORLD, 2023, 67 (05) : 1123 - 1132
[6] On the feasibility of AISI 304 stainless steel laser welding with metal powder
Errico, V.
Campanelli, S. L.
Angelastro, A.
Mazzarisi, M.
Casalino, G.
JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 : 96 - 105
[7] Wear and corrosion characterisation of AISI 1030, AISI 1040 and AISI 1050 steel coated with Shielded Metal Arc Welding (SMAW) and Plasma Transfer Arc (PTA) methods
Oteyaka, Mustafa Ozgur
Arslan, Asli Ergenekon
Cakir, Fatih Hayati
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2021, 46 (03):
[8] Formability Prediction of Laser-Welded Stainless Steel AISI 304 and AISI 430
Evin, Emil
Tomas, Miroslav
METALS, 2022, 12 (01)
[9] Wear and corrosion characterisation of AISI 1030, AISI 1040 and AISI 1050 steel coated with Shielded Metal Arc Welding (SMAW) and Plasma Transfer Arc (PTA) methods
Mustafa Özgür Öteyaka
Asli Ergenekon Arslan
Fatih Hayati Çakir
Sādhanā, 2021, 46
[10] The Effect of Preheating on the Mechanical Properties of AISI 1037 and AISI 304 Welded Joints Using Shielded Metal Arc Welding
Sudarsono, Amir
Arifin, Amir
Gunawan, Muhammad R. Y. Q. A.
Wijaya, Muhammad R. Y. Q. A.
Barata, La Ode Ahmad
Ramli, Mohd Ikram
MATERIALS, 2024, 17 (23)

← 1 2 3 4 5 →