Enhanced dynamic exergy analysis of a micro-jet (μ-jet) engine at various modes

被引:10
|
作者
Balli, Ozgur [1 ]
Aygun, Hakan [2 ]
Turan, Onder [3 ]
机构
[1] Minist Natl Def, Gen Directorate Mil Factories, Air Maintenance Factory Directorate 1, TR-26120 Eskisehir, Turkey
[2] Firat Univ, Dept Air Frame & Power Plant, TR-23119 Elazig, Turkey
[3] Eskisehir Tech Univ, Fac Aeronaut & Astronaut, TR-26450 Eskisehir, Turkey
关键词
Advance exergy; Microjet; Turbojet; Propulsion; TURBOPROP ENGINE; PERFORMANCE; DESTRUCTION; EVALUATE;
D O I
10.1016/j.energy.2021.121911
中图分类号
O414.1 [热力学];
学科分类号
摘要
In the current study, advanced exergo-dynamic analysis of a micro-turbo jet (mu-jet) along with conventional exergy analysis is presented in various running shaft speed modes. In this context, major advanced exergetic indicators of mu-jet components are evaluated at the various running testing. The operation modes were represented as operation shaft speeds between 48,850 and 77,000 RPM (revolution per minute), while mu-jet produced within the range of 45.01-121.27 N thrust force in these modes. Improvement potentials of turbomachinery components and exergy destruction rates are calculated throughout the real-time testing modes. According to the analysis, the combustor has the lowest exergy efficiency ranging from 41.06% to 50.18%. Also, the study shows that the exergy efficiency values of the experimental mu-jet are found to be as 6.56% at Mode-1, 10.12% at Mode-2, 15.46% at Mode-3 and 17.02% at Mode-4, respectively. Other important findings for mu-jet are that unavoidable exergy destruction rate varies between 94.89% and 95.79%, while endogenous exergy destruction value changes between 89.79% and 91.47% in these modes. Thanks to the present analysis, the methods decreasing avoidable exergy destruction that changes between 4.21% and 5.11% could be focused. (C) 2021 Elsevier Ltd. All rights reserved.
引用
收藏
页数:22
相关论文
共 50 条
  • [1] A SMART MICRO-JET ENGINE
    PILENI, MP
    [J]. RECHERCHE, 1991, 22 (236): : 1220 - 1222
  • [2] Plume flow characteristics of rectangular exhaust nozzles in a micro-jet engine
    Lee, C.
    Choi, S. M.
    [J]. AERONAUTICAL JOURNAL, 2024, 128 (1322): : 685 - 705
  • [3] Spray characteristics of the rotating fuel injection system of a micro-jet engine
    Seong Man Choi
    Seong Ho Jang
    Dong Hun Lee
    Gyong Won You
    [J]. Journal of Mechanical Science and Technology, 2010, 24 : 551 - 558
  • [4] Spray characteristics of the rotating fuel injection system of a micro-jet engine
    Choi, Seong Man
    Jang, Seong Ho
    Lee, Dong Hun
    You, Gyong Won
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (02) : 551 - 558
  • [5] Bifurcation of a liquid micro-jet in a vacuum
    Yaskin, A. S.
    Zarvin, A. E.
    Dubrovin, K. A.
    Kalyada, V. V.
    [J]. VACUUM, 2022, 198
  • [6] Piezoelectric micro-jet devices: A review
    Li, Hengyu
    Liu, Junkao
    Li, Kai
    Liu, Yingxiang
    [J]. SENSORS AND ACTUATORS A-PHYSICAL, 2019, 297
  • [7] BUSDUCTS WELDING WITH MICRO-JET COOLING
    Szczucka-Lasota, Bozena
    Wegrzyn, Tomasz
    Silva, Abilio
    Krzysztoforski, Michal
    [J]. 7TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE (IRF2020), 2020, : 533 - 540
  • [8] Axis-switching of a micro-jet
    Martin Cabaleiro, Juan
    Aider, Jean-Luc
    [J]. PHYSICS OF FLUIDS, 2014, 26 (03)
  • [9] Aircraft Jet Engine Exhaust Nozzle Controller Based on Turbine Pressure Ratio Sensor with Micro-Jet System
    Tudosie, Alexandru-Nicolae
    [J]. 2012 INTERNATIONAL CONFERENCE ON APPLIED AND THEORETICAL ELECTRICITY (ICATE), 2012,
  • [10] INVESTIGATION OF THE WATER GUIDED LASER MICRO-JET MACHINING OF AERO ENGINE COMPONENTS
    Wang, Zhigang
    [J]. PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1, 2017,