Assessing plastic shear resistance of bulk metallic glasses under nanoindentation

被引：17
|
作者：
Wang, L. [1 ]
Song, S. X. [1 ]
Nieh, T. G. [1 ]
机构：
[1] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA
来源：
APPLIED PHYSICS LETTERS | 2008年 / 92卷 / 10期
关键词：
D O I：
10.1063/1.2897301
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
Nanoindentation tests were conducted on three different bulk metallic glasses (BMGs) using both the Berkovich and cube-corner tips. Larger displacement and more pronounced pop ins were observed under cube-corner tip in all three materials. Pop-in distance and indentation depths were used to determine the plastic shear resistance of different BMGs under nanoindentation. The plastic shear resistance was found to be independent of the shape of the indenter and dependent only on material; it is linearly scaled with the shear modulus of a material. (c) 2008 American Institute of Physics.
引用
收藏
页数：3
相关论文
共 50 条
  • [1] Plastic deformation of Zr-based bulk metallic glasses under nanoindentation
    Liu, L
    Chan, KC
    [J]. MATERIALS LETTERS, 2005, 59 (24-25) : 3090 - 3094
  • [2] On the fracture toughness of bulk metallic glasses under Berkovich nanoindentation
    Guo, H.
    Jiang, C. B.
    Yang, B. J.
    Wang, J. Q.
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2018, 481 : 321 - 328
  • [3] Correlation between hardness and shear banding of metallic glasses under nanoindentation
    Li, Fucheng
    Song, Min
    Ni, Song
    Guo, Shengfeng
    Liao, Xiaozhou
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 657 : 38 - 42
  • [4] Computational modeling of plastic deformation and shear banding in bulk metallic glasses
    Cheng, Jiahao
    Ghosh, Somnath
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2013, 69 : 494 - 504
  • [5] Serrated plastic flow during nanoindentation in Nd-based bulk metallic glasses
    Wei, BC
    Zhang, TH
    Li, WH
    Sun, YF
    Yu, Y
    Wang, YR
    [J]. INTERMETALLICS, 2004, 12 (10-11) : 1239 - 1243
  • [6] Shear punching of bulk metallic glasses under low stress
    Sun, Fei
    Wang, Bei
    Luo, Feng
    Yan, Yu Qiang
    Ke, Hai Bo
    Ma, Jiang
    Shen, Jun
    Wang, Wei Hua
    [J]. MATERIALS & DESIGN, 2020, 190
  • [7] Plastic deformation behavior of Fe-Co-B-Si-Nb-Cr bulk metallic glasses under nanoindentation
    Kim, J. T.
    Hong, S. H.
    Lee, C. H.
    Park, J. M.
    Kim, T. W.
    Lee, W. H.
    Yim, H. I.
    Kim, K. B.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 587 : 415 - 419
  • [8] Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses
    Pan, D.
    Inoue, A.
    Sakurai, T.
    Chen, M. W.
    [J]. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 2008, 105 (39) : 14769 - 14772
  • [9] Shear processes in bulk metallic glasses
    Safarik, DJ
    Cady, CM
    Schwarz, RB
    [J]. ACTA MATERIALIA, 2005, 53 (08) : 2193 - 2202
  • [10] A nanoindentation study of serrated flow in bulk metallic glasses
    Schuh, CA
    Nieh, TG
    [J]. ACTA MATERIALIA, 2003, 51 (01) : 87 - 99
12345