Assessment of fatigue life and crack growth resistance of friction stir welded AISI 409M ferritic stainless steel joints

被引：44

作者：

Lakshminarayanan, A. K. ^{[1
]}

Balasubramanian, V. ^{[1
]}

机构：

[1] Annamalai Univ, Dept Mfg Engn, Annamalainagar 608002, Tamil Nadu, India

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2012年 / 539卷

关键词：

Friction stir welding; Ferritic stainless steel; Fatigue; NEAR-THRESHOLD FATIGUE; RESIDUAL-STRESS; STRENGTH; MICROSTRUCTURE; BEHAVIOR; ALLOY; PROPAGATION; TOUGHNESS;

D O I：

10.1016/j.msea.2012.01.071

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Fatigue life and fatigue crack growth behaviour of friction stir welded AN 409M grade ferritic stainless steel joints in comparison with the base metal was studied. The fatigue life and fatigue crack growth behaviour were evaluated using hourglass and centre cracked tension specimens, respectively. A 100 kN servo hydraulic controlled fatigue testing machine was used to test the specimens under constant amplitude uniaxial tensile load with a stress ratio of 0.1 and a frequency of 15 Hz. It is found that, the joint fabricated by the friction stir welding process showed superior fatigue life and fatigue crack growth resistance compared to that of the base metal. This was mainly due to the synergetic effect of dual phase ferritic-martensitic microstructure, superior tensile properties and favourable residual stress, which inhibited the growth of cracks compared with that of the single phase ferritic stainless steel base metal. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：143 / 153

页数：11

共 50 条

[1] Characteristics of Laser Beam and Friction Stir Welded AISI 409M Ferritic Stainless Steel Joints
A. K. Lakshminarayanan
V. Balasubramanian
[J]. Journal of Materials Engineering and Performance, 2012, 21 : 530 - 539
[2] Characteristics of Laser Beam and Friction Stir Welded AISI 409M Ferritic Stainless Steel Joints
Lakshminarayanan, A. K.
Balasubramanian, V.
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (04) : 530 - 539
[3] Sensitization resistance of friction stir welded AISI 409 M grade ferritic stainless steel joints
Lakshminarayanan, A. K.
Balasubramanian, V.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 59 (9-12): : 961 - 967
[4] Sensitization resistance of friction stir welded AISI 409 M grade ferritic stainless steel joints
A. K. Lakshminarayanan
V. Balasubramanian
[J]. The International Journal of Advanced Manufacturing Technology, 2012, 59 : 961 - 967
[5] Fatigue Crack Growth Behavior of AISI 409M Grade Ferritic Stainless Steel Welded Joints Using Austenitic, Ferritic and Duplex Stainless Steel Electrodes
Lakshminarayanan, A. K.
Shanmugam, K.
Balasubramanian, V.
[J]. ISIJ INTERNATIONAL, 2008, 48 (11) : 1640 - 1646
[6] Mechanical Properties and Microstructure of Resistance Spot Welded Joints of AISI 409M Ferritic Stainless Steel
Subrammanian, A.
Jabaraj, D. B.
Raja, V. K. Bupesh
[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (03) : 767 - 774
[7] Mechanical Properties and Microstructure of Resistance Spot Welded Joints of AISI 409M Ferritic Stainless Steel
A. Subrammanian
D. B. Jabaraj
V. K. Bupesh Raja
[J]. Transactions of the Indian Institute of Metals, 2016, 69 : 767 - 774
[8] Understanding the Parameters Controlling Friction Stir Welding of AISI 409M Ferritic Stainless Steel
Lakshminarayanan, A. K.
Balasubramanian, V.
[J]. METALS AND MATERIALS INTERNATIONAL, 2011, 17 (06) : 969 - 981
[9] Understanding the parameters controlling friction stir welding of AISI 409M ferritic stainless steel
A. K. Lakshminarayanan
V. Balasubramanian
[J]. Metals and Materials International, 2011, 17 : 969 - 981
[10] Effect of process parameters on the mechanical performance of resistance spot welded joints of AISI 409M ferritic stainless steel
Subrammanian, A.
Senthiil, P. V.
Jabaraj, D. B.
Jayaprakash, J.
[J]. INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2018, 25 (01) : 11 - 18

← 1 2 3 4 5 →