MICRO-ELECTROMECHANICAL-SYSTEM (MEMS) BASED SWITCHES FOR POWER APPLICATIONS

A new system for switching electrical power using Micro-Electromechanical-Systems (MEMS) is presented. The heart of the system utilizes custom designed MEMS switching device arrays that are able to conduct current more efficiently and can open orders of magnitude faster than traditional macroscopic mechanical relays. Up to now, MEMS switches have been recognized for their ability to switch very quickly due to their low mass, but have only been used to carry and switch very low currents at extremely low voltage. However, recent developments have enabled suppression of the arc that normally occurs when the MEMS switch is opened while current is flowing. The combination of the arc suppression with the MEMS switch arrays designed for this purpose enables a breakthrough increase in current and voltage handling capability. The resultant technology has been scaled to handle many Amps of current and switch 100's of volts. Such current and voltage handling capability delivers improved energy efficiency and the capacity to handle fault current levels that are encountered in typical AC or DC power systems. Fault current interruption takes place in less than 10 microseconds, almost regardless of the prospective fault current magnitude. The properties of the MEMS switch arrays allow the switching mechanism to operate at temperatures in excess of 200 deg. C. The switches also have a vibration tolerance in excess of 1000G. The combination of fast MEMS switching speed, optimized current and voltage handling capacity of the switch arrays, the arc suppression circuitry and optimized sensing and control enable a single sensing, control and switching system to operate in a small fraction of a millisecond. This paper will present the basic physics of the MEMS switches together with recent advances that enable the technology. Some illustrative examples of the ways the devices may be used to provide protection and control within electrical systems will also be presented.